Gargoyle-ispy 2014-July-28.7z

Want to share your OpenWrt / Gargoyle knowledge? Implemented a new feature? Let us know here.

Moderator: Moderators

out of rules
Posts: 10
Joined: Tue Oct 22, 2013 2:07 pm

Re: Gargoyle-ispy 2014-July-28.7z

Postby out of rules » Mon Aug 11, 2014 10:29 pm

ispyisail wrote:Bump OpenWrt to r41503

https://dev.openwrt.org/changeset/41952 pls

User avatar
djt_nz
Posts: 26
Joined: Mon May 07, 2012 1:00 am
Location: New Zealand

Re: Gargoyle-ispy 2014-July-28.7z

Postby djt_nz » Tue Aug 12, 2014 12:41 am



That patch will only effect OpenWRT trunk. These builds from ispyisail will still be using OpenWRT Attitude Adjustment because that's the OpenWRT branch Gargoyle is built with.

Will need to wait and see if it gets back ported to Attitude Adjustment branch.
TL-WR1043ND V1.8 (Gargoyle 1.7.X git@701d7f5) djt build

ispyisail
Moderator
Posts: 4624
Joined: Mon Apr 06, 2009 3:15 am
Location: New Zealand

Re: Gargoyle-ispy 2014-July-28.7z

Postby ispyisail » Tue Aug 12, 2014 5:48 am

That patch will only effect OpenWRT trunk. These builds from ispyisail will still be using OpenWRT Attitude Adjustment because that's the OpenWRT branch Gargoyle is built with.


True

This week some time Eric is about to do a final build against AA

Then onto BB

dieselz
Posts: 40
Joined: Fri Jun 07, 2013 3:39 am
Contact:

Re: Gargoyle-ispy 2014-July-28.7z

Postby dieselz » Wed Aug 13, 2014 5:59 pm

i am sorry for asking this here but i thought i'd try dd-wrt before trying your new release and now that i want to go back i am stuck.. whenever i flash any gargoyle bin it just restarts and back to the same firmware,
no firmware can be flashed from gui and the recovery window is too narrow i cannot successfully flash with tftp. could this be nvram problem?
or is there a bin i can use to go back to gargoyle please???
my quota is being abused and the people in my network is out of control i need to get back that easy-to-configure quota limit.
thank you.
TP-Link WDR4300 H/W Rev.1.6 Gargoyle-iSpy 1.9.x / Netgear WNDR4300 Gargoyle-iSpy 1.9.x

scrmtrey
Posts: 102
Joined: Wed May 14, 2014 2:25 am

Re: Gargoyle-ispy 2014-July-28.7z

Postby scrmtrey » Thu Aug 14, 2014 11:30 am

First go to stock firmware. Than flash gargoyle.
wdr3600 v1.5 @ Latest ispyisail build

dieselz
Posts: 40
Joined: Fri Jun 07, 2013 3:39 am
Contact:

Re: Gargoyle-ispy 2014-July-28.7z

Postby dieselz » Thu Aug 14, 2014 4:13 pm

i tried but nothing works, after flash i still get dd-wrt @_@
its so weird i used to switch between the two no problems via gui
TP-Link WDR4300 H/W Rev.1.6 Gargoyle-iSpy 1.9.x / Netgear WNDR4300 Gargoyle-iSpy 1.9.x

pmerrill
Posts: 280
Joined: Wed Feb 15, 2012 8:23 pm

Re: Gargoyle-ispy 2014-July-28.7z

Postby pmerrill » Thu Aug 14, 2014 11:25 pm

You know you probably have to take Stock can cut down the bin file? There is a thread from memory on dd-wrt that has all the "back to stock" files as an attachment.
Paul
Gargoyle 1.11.x on TP-Link Archer C7 V2 H/W

n0pin
Posts: 129
Joined: Thu Jan 09, 2014 6:39 am

Re: Gargoyle-ispy 2014-July-28.7z

Postby n0pin » Fri Aug 15, 2014 4:57 am

I once faced this problem too. Everytime I tried to upgrade new firmware when using DD-WRT, it came back after reboot. Even webrevert images DD-WRT provides didn't work.

I solved this problem by using SCP to copy firmware image (beware, sometimes you need to use stripped image, depends on router) to /tmp folder on router. Then I issued this command (image.bin is name of the firmware file I uploaded):

Code: Select all

mtd -r write /tmp/image.bin linux


After that I finally managed to get back to factory firmware.

This could probably also solved using TFTP.

scrmtrey
Posts: 102
Joined: Wed May 14, 2014 2:25 am

Re: Gargoyle-ispy 2014-July-28.7z

Postby scrmtrey » Fri Aug 15, 2014 12:21 pm

Is it possible to have ipv6 DHCP on local network ? With gargoyle AA or BB later ?
wdr3600 v1.5 @ Latest ispyisail build

scrmtrey
Posts: 102
Joined: Wed May 14, 2014 2:25 am

Re: Gargoyle-ispy 2014-July-28.7z

Postby scrmtrey » Fri Aug 15, 2014 12:57 pm

ispyisail wrote:
That patch will only effect OpenWRT trunk. These builds from ispyisail will still be using OpenWRT Attitude Adjustment because that's the OpenWRT branch Gargoyle is built with.


True

This week some time Eric is about to do a final build against AA

Then onto BB


When will be the first BB gargoyle version online ? Cant wait. 8-)
wdr3600 v1.5 @ Latest ispyisail build


Return to “Show / Tell / Contribute”

Who is online

Users browsing this forum: No registered users and 3 guests