Gargoyle-ispy 2014-July-28.7z

Want to share your OpenWrt / Gargoyle knowledge? Implemented a new feature? Let us know here.

Moderator: Moderators

ispyisail
Moderator
Posts: 5180
Joined: Mon Apr 06, 2009 3:15 am
Location: New Zealand

Gargoyle-ispy 2014-July-28.7z

Post by ispyisail »

USE AT YOU OWN RISK

Gargoyle-ispy 2014-July-28.7z
http://goo.gl/DmLuMC

Bump OpenWrt to r41503

Plus other stuff

tapper
Moderator
Posts: 1076
Joined: Sun Oct 13, 2013 5:49 pm
Location: Stoke-on-trent UK

Re: Gargoyle-ispy 2014-July-28.7z

Post by tapper »

Thanks mate. I installed on my TP-Link WR1043ND v2.1 all is good.
I cant wate for Gargoyle on my WD N750 it's grate with openwrt but its not the same as Gargoyle for me imo
Linksys WRT3200ACM
NETGEAR Nighthawk R7800
NETGEAR R6260

scrmtrey
Posts: 102
Joined: Wed May 14, 2014 2:25 am

Re: Gargoyle-ispy 2014-July-28.7z

Post by scrmtrey »

Nice. Will update my wr1043nd ASAP , later this week.

Also it would be great if you could post release notes or changes , more than just version. :)


Thanks for your work.
wdr3600 v1.5 @ Latest ispyisail build

ispyisail
Moderator
Posts: 5180
Joined: Mon Apr 06, 2009 3:15 am
Location: New Zealand

Re: Gargoyle-ispy 2014-July-28.7z

Post by ispyisail »


gio25
Posts: 1
Joined: Mon Jul 28, 2014 5:53 pm

Re: Gargoyle-ispy 2014-July-28.7z

Post by gio25 »

Something for the TL-941ND v5?

Sobol
Posts: 16
Joined: Wed Jun 12, 2013 10:30 pm

Re: Gargoyle-ispy 2014-July-28.7z

Post by Sobol »

Updated to this version, strange warning (never listed in dmesg before):
[81287.980000] ------------[ cut here ]------------
[81287.980000] WARNING: at /home/user/gargoyle/ar71xx-src/build_dir/linux-ar71xx_generic/compat-wireless-2014-05-22/net/mac80211/rx.c:3372 0x80e1f210()
[81288.000000] Rate marked as an HT rate but passed status->rate_idx is not an MCS index [0-76]: 79 (0x4f)
[81288.010000] Modules linked in: ppp_mppe sha1_generic ecb crypto_blkcipher cryptomgr aead crypto_hash fuse qcserial option usb_wwan ums_usbat ums_sddr55 ums_sddr09 ums_karma ums_jumpshot ums_isd200 ums_freecom ums_datafab ums_cypress ums_alauda sierra_net(O) sierra(O) usbserial usblp usbnet cdc_acm ath79_wdt ledtrig_usbdev ledtrig_netdev xt_set(O) ip_set_list_set(O) ip_set_hash_netport(O) ip_set_hash_netiface(O) ip_set_hash_net(O) ip_set_hash_ipportnet(O) ip_set_hash_ipportip(O) ip_set_hash_ipport(O) ip_set_hash_ip(O) ip_set_bitmap_port(O) ip_set_bitmap_ipmac(O) ip_set_bitmap_ip(O) ip_set(O) ebt_among ebt_802_3 nfnetlink xt_IMQ imq ipt_weburl ipt_webmon ipt_timerange nf_nat_tftp nf_conntrack_tftp nf_nat_snmp_basic nf_conntrack_snmp nf_nat_sip nf_conntrack_sip nf_nat_pptp nf_conntrack_pptp nf_nat_h323 nf_conntrack_h323 nf_nat_proto_gre nf_conntrack_proto_gre nf_nat_amanda nf_conntrack_amanda nf_conntrack_broadcast nf_nat_irc nf_conntrack_irc nf_nat_ftp nf_conntrack_ftp xt_iprange xt_HL xt_hl xt_ecn ipt_ECN xt_CLASSIFY xt_time xt_tcpmss xt_statistic xt_mark xt_length xt_DSCP xt_dscp xt_string xt_layer7 xt_quota xt_pkttype xt_physdev xt_owner ipt_bandwidth ipt_REDIRECT ipt_NETMAP ipt_MASQUERADE iptable_nat nf_nat xt_recent xt_helper xt_connmark xt_connbytes pptp pppoe xt_conntrack xt_CT xt_NOTRACK iptable_raw xt_state nf_conntrack_ipv4 nf_defrag_ipv4 nf_conntrack pppox ipt_REJECT xt_TCPMSS ipt_LOG xt_comment xt_multiport xt_mac xt_limit iptable_mangle iptable_filter ip_tables nfsd nfs msdos ip_gre gre tun ppp_async ppp_generic slhc vfat fat lockd sunrpc hfsplus ath9k(O) ath9k_common(O) ath9k_hw(O) ath(O) nls_utf8 nls_koi8_r nls_iso8859_2 nls_iso8859_15 nls_iso8859_13 nls_iso8859_1 nls_cp866 nls_cp852 nls_cp850 nls_cp775 nls_cp437 nls_cp1251 nls_cp1250 mac80211(O) ts_fsm ts_bm ts_kmp crc_ccitt exportfs cfg80211(O) compat(O) arc4 aes_generic usb_storage ohci_hcd ehci_hcd sd_mod ext4 jbd2 mbcache usbcore usb_common scsi_mod nls_base crc16 crypto_algapi ledtrig_timer ledtrig_default_on leds_gpio gpio_button_hotplug(O)
[81288.190000] Call Trace:[<802798c8>] 0x802798c8
[81288.190000] [<802798c8>] 0x802798c8
[81288.190000] [<80071aec>] 0x80071aec
[81288.200000] [<80e1f210>] 0x80e1f210
[81288.200000] [<80071ba0>] 0x80071ba0
[81288.210000] [<80e1f210>] 0x80e1f210
[81288.210000] [<80de53e0>] 0x80de53e0
[81288.210000] [<801e0694>] 0x801e0694
[81288.220000] [<80096eec>] 0x80096eec
[81288.220000] [<8007c720>] 0x8007c720
[81288.220000] [<80ecc60c>] 0x80ecc60c
[81288.230000] [<80de6758>] 0x80de6758
[81288.230000] [<80162534>] 0x80162534
[81288.230000] [<80de3e14>] 0x80de3e14
[81288.240000] [<80076bd0>] 0x80076bd0
[81288.240000] [<800770f4>] 0x800770f4
[81288.240000] [<80077300>] 0x80077300
[81288.250000] [<800a85a0>] 0x800a85a0
[81288.250000] [<80077534>] 0x80077534
[81288.250000] [<800631cc>] 0x800631cc
[81288.260000] [<800922c4>] 0x800922c4
[81288.260000] [<800633a0>] 0x800633a0
[81288.270000] [<800952f0>] 0x800952f0
[81288.270000] [<800a8240>] 0x800a8240
[81288.270000] [<80064c08>] 0x80064c08
[81288.280000] [<800633c0>] 0x800633c0
[81288.280000] [<802e88b0>] 0x802e88b0
[81288.280000] [<8030e888>] 0x8030e888
[81288.290000] [<802e80dc>] 0x802e80dc
[81288.290000]
[81288.290000] ---[ end trace a13c482b78bf0253 ]---

scrmtrey
Posts: 102
Joined: Wed May 14, 2014 2:25 am

Re: Gargoyle-ispy 2014-July-28.7z

Post by scrmtrey »

After one day wifi slow down to 5mbps. Previous version works fine even after 14 days. Really sad.

Probably will go back to previous version.
wdr3600 v1.5 @ Latest ispyisail build

Sobol
Posts: 16
Joined: Wed Jun 12, 2013 10:30 pm

Re: Gargoyle-ispy 2014-July-28.7z

Post by Sobol »

Problem with error "ath: phy0: Failed to stop TX DMA" at TL-WR1043ND v.1 also isn't resolved - there is same errors after update to 2014-July-28 version, but as I see it can be expected in hight traffic time and low traffic times :
[94400.070000] ath: phy0: Failed to stop TX DMA, queues=0x008!
[94400.990000] ath: phy0: Failed to stop TX DMA, queues=0x008!
[94570.770000] ath: phy0: Failed to stop TX DMA, queues=0x00c!
[94720.070000] ath: phy0: Failed to stop TX DMA, queues=0x008!
[94872.540000] ath: phy0: Failed to stop TX DMA, queues=0x008!
[95135.090000] ath: phy0: Failed to stop TX DMA, queues=0x008!
[95767.100000] ath: phy0: Failed to stop TX DMA, queues=0x004!
[95769.970000] ath: phy0: Failed to stop TX DMA, queues=0x004!
[96029.960000] ath: phy0: Failed to stop TX DMA, queues=0x004!
[96030.170000] ath: phy0: Failed to stop TX DMA, queues=0x004!
[96098.770000] ath: phy0: Failed to stop TX DMA, queues=0x004!
[96099.490000] ath: phy0: Failed to stop TX DMA, queues=0x004!
[96115.980000] ath: phy0: Failed to stop TX DMA, queues=0x004!
[96163.090000] ath: phy0: Failed to stop TX DMA, queues=0x104!
[96271.620000] ath: phy0: Failed to stop TX DMA, queues=0x004!
[96279.410000] ath: phy0: Failed to stop TX DMA, queues=0x004!
[96358.660000] ath: phy0: Failed to stop TX DMA, queues=0x004!
[96402.490000] ath: phy0: Failed to stop TX DMA, queues=0x004!
[96509.910000] ath: phy0: Failed to stop TX DMA, queues=0x004!
[96526.600000] ath: phy0: Failed to stop TX DMA, queues=0x004!
[96613.130000] ath: phy0: Failed to stop TX DMA, queues=0x004!
[96677.430000] ath: phy0: Failed to stop TX DMA, queues=0x004!
[96691.560000] ath: phy0: Failed to stop TX DMA, queues=0x004!
[96693.820000] ath: phy0: Failed to stop TX DMA, queues=0x004!
[96694.330000] ath: phy0: Failed to stop TX DMA, queues=0x004!
[96810.140000] ath: phy0: Failed to stop TX DMA, queues=0x004!
[96841.170000] ath: phy0: Failed to stop TX DMA, queues=0x004!
[96847.930000] ath: phy0: Failed to stop TX DMA, queues=0x004!
[96858.690000] ath: phy0: Failed to stop TX DMA, queues=0x004!
[96870.380000] ath: phy0: Failed to stop TX DMA, queues=0x004!
[106371.980000] ath: phy0: Failed to stop TX DMA, queues=0x008!
[202525.820000] ath: phy0: Failed to stop TX DMA, queues=0x004!
Thinking about downgrade to previous version.

scrmtrey
Posts: 102
Joined: Wed May 14, 2014 2:25 am

Re: Gargoyle-ispy 2014-July-28.7z

Post by scrmtrey »

Yes, the same as before june 15, june 15 version works awesome.
wdr3600 v1.5 @ Latest ispyisail build

robnitro
Posts: 84
Joined: Sat Feb 26, 2011 4:50 pm

Re: Gargoyle-ispy 2014-July-28.7z

Post by robnitro »

How do you exactly build it?
Git clone, and then ./build.sh "target" or in your case all of them?
I did a build but it was odd, a lot of things said undefined in the web interface!

Post Reply