wifi survey, themes & captive portal questions [split]

General discussion about Gargoyle, OpenWrt or anything else even remotely related to the project

Moderator: Moderators

sajjadhalai
Posts: 108
Joined: Sun Apr 08, 2012 6:54 am

Re: wifi survey, themes & captive portal questions [split]

Post by sajjadhalai »

I konw most of basic..cascade style sheets.. but not in deep..
I will try. If you plz provide Me The patch.. thanx.Bro

BashfulBladder
Moderator
Posts: 250
Joined: Thu Jan 17, 2013 11:43 pm

Re: wifi survey, themes & captive portal questions [split]

Post by BashfulBladder »

TP-Link WDR3600 v1.1 running 1.5.10+ L10n-English (Built 20130922 - OpenWrt r38093)
TP-Link WDR4300 running 1.5.10+ i18n-English (Built 20131010 - OpenWrt r38286)

https://github.com/BashfulBladder/gargoyle-plugins/wiki

Sport
Posts: 5
Joined: Wed Nov 05, 2014 12:59 am

Re: wifi survey, themes & captive portal questions [split]

Post by Sport »

Dear BashfulBladder,

I really need the wifi survey plugin. But it seems that it not works correctly in 1.6.2 and 1.7 on UI. The plugin installs correctly, I can download the vendor file but in the end nothing shows up.

Image

However, it will still work with the command line:

Code: Select all

root@#TCDT:~# iw wlan0 scan
BSS c6:6e:1f:61:16:7a(on wlan0)
        TSF: 3342614624 usec (0d, 00:55:42)
        freq: 2412
        beacon interval: 100 TUs
        capability: ESS Privacy ShortPreamble ShortSlotTime (0x0431)
        signal: -86.00 dBm
        last seen: 660 ms ago
        Information elements from Probe Response frame:
        SSID: PLUS
        Supported rates: 1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0 18.0
        DS Parameter set: channel 1
        ERP: <no flags>
        Extended supported rates: 24.0 36.0 48.0 54.0
        RSN:     * Version: 1
                 * Group cipher: CCMP
                 * Pairwise ciphers: CCMP
                 * Authentication suites: PSK
                 * Capabilities: 16-PTKSA-RC 1-GTKSA-RC (0x000c)
        HT capabilities:
                Capabilities: 0x116c
                        HT20
                        SM Power Save disabled
                        RX HT20 SGI
                        RX HT40 SGI
                        RX STBC 1-stream
                        Max AMSDU length: 3839 bytes
                        DSSS/CCK HT40
                Maximum RX AMPDU length 65535 bytes (exponent: 0x003)
                Minimum RX AMPDU time spacing: 8 usec (0x06)
                HT TX/RX MCS rate indexes supported: 0-7
        HT operation:
                 * primary channel: 1
                 * secondary channel offset: no secondary
                 * STA channel width: 20 MHz
                 * RIFS: 0
                 * HT protection: no
                 * non-GF present: 0
                 * OBSS non-GF present: 0
                 * dual beacon: 0
                 * dual CTS protection: 0
                 * STBC beacon: 0
                 * L-SIG TXOP Prot: 0
                 * PCO active: 0
                 * PCO phase: 0
        Extended capabilities: 6
        WMM:     * Parameter version 1
                 * BE: CW 15-1023, AIFSN 3
                 * BK: CW 15-1023, AIFSN 7
                 * VI: CW 7-15, AIFSN 2, TXOP 3008 usec
                 * VO: CW 3-7, AIFSN 2, TXOP 1504 usec
........................
Can you fix this or further development of this plugin is not. Please!

Post Reply