Installed this 1.9.5. experimental build on my WZR-HP-G300NH and I have noticed few things not working.
SITUATION:
Primary router is wifi adsl router (PPPoE client) - 10.3.2.1/24
WZR is (client-bridge-repeater to primary) - 10.3.2.2/24 - GW/DNS -> 10.3.2.1
1) from WZR console cannot ping neither the primary router or NET?
2) DHCP and DNS resolution is not working for wired/wifi clients connected to WZR,
3) if I set on my laptop (wired to WZR) the correct IP addres the NET is OK...
4) ntp is not working too?
NOTE: ALL that is working on last 1.4.7 stable build (no single issue).
How can I help more?
1.5.9. client-bridge-repeater
Moderator: Moderators
Re: 1.5.9. client-bridge-repeater
I tried to duplicate your results without success.
Connection is good, pings are good. Screen shots below.
Connection is good, pings are good. Screen shots below.
- login as: root
root@192.168.2.2's password:
BusyBox v1.19.4 (2013-01-03 08:17:10 EST) built-in shell (ash)
Enter 'help' for a list of built-in commands.
------------------------------------------------------------------
| _____ _ |
| | __ \ | | |
| | | \/ __ _ _ __ __ _ ___ _ _| | ___ |
| | | __ / _` | '__/ _` |/ _ \| | | | |/ _ \ |
| | |_\ \ (_| | | | (_| | (_) | |_| | | __/ |
| \____/\__,_|_| \__, |\___/ \__, |_|\___| |
| __/ | __/ | |
| |___/ |___/ |
| |
|----------------------------------------------------------------|
| Gargoyle version 1.5.9 | OpenWrt Attitude Adjustment branch |
| Gargoyle revision f73df29 | OpenWrt revision r34879 |
| Built January 03, 2013 | Target ar71xx/usb_large |
------------------------------------------------------------------
root@Gargoyle:~# ifconfig
br-lan Link encap:Ethernet HWaddr 02:24:A5:AF:FF:64
inet addr:192.168.2.2 Bcast:192.168.2.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:791 errors:0 dropped:0 overruns:0 frame:0
TX packets:638 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:79687 (77.8 KiB) TX bytes:374348 (365.5 KiB)
eth0 Link encap:Ethernet HWaddr 00:24:A5:AF:FF:63
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:121 errors:0 dropped:0 overruns:0 frame:0
TX packets:202 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:16345 (15.9 KiB) TX bytes:26391 (25.7 KiB)
Interrupt:4
eth0.1 Link encap:Ethernet HWaddr 00:24:A5:AF:FF:63
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:114 errors:0 dropped:0 overruns:0 frame:0
TX packets:201 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:13576 (13.2 KiB) TX bytes:24544 (23.9 KiB)
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:5 errors:0 dropped:0 overruns:0 frame:0
TX packets:5 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:429 (429.0 B) TX bytes:429 (429.0 B)
wlan0 Link encap:Ethernet HWaddr 00:24:A5:AF:FF:63
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:261 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:32
RX bytes:0 (0.0 B) TX bytes:37311 (36.4 KiB)
wlan0-1 Link encap:Ethernet HWaddr 02:24:A5:AF:FF:64
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:716 errors:0 dropped:0 overruns:0 frame:0
TX packets:694 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:32
RX bytes:88817 (86.7 KiB) TX bytes:396246 (386.9 KiB)
root@Gargoyle:~# ping 192.168.2.1
PING 192.168.2.1 (192.168.2.1): 56 data bytes
64 bytes from 192.168.2.1: seq=0 ttl=64 time=1.435 ms
64 bytes from 192.168.2.1: seq=1 ttl=64 time=1.390 ms
^C
--- 192.168.2.1 ping statistics ---
2 packets transmitted, 2 packets received, 0% packet loss
round-trip min/avg/max = 1.390/1.412/1.435 ms
root@Gargoyle:~# ping http://www.google.com
PING http://www.google.com (173.194.73.106): 56 data bytes
64 bytes from 173.194.73.106: seq=0 ttl=47 time=51.331 ms
64 bytes from 173.194.73.106: seq=1 ttl=47 time=51.118 ms
^C
--- http://www.google.com ping statistics ---
2 packets transmitted, 2 packets received, 0% packet loss
round-trip min/avg/max = 51.118/51.224/51.331 ms
root@Gargoyle:~#
Linksys WRT1900ACv2
Netgear WNDR3700v2
TP Link 1043ND v3
TP-Link TL-WDR3600 v1
Buffalo WZR-HP-G300NH2
WRT54G-TM
Netgear WNDR3700v2
TP Link 1043ND v3
TP-Link TL-WDR3600 v1
Buffalo WZR-HP-G300NH2
WRT54G-TM
Re: 1.5.9. client-bridge-repeater
@pbix
Thanks for the effort, after 3,4 hours of flashing/reflashing/reconfiguring the 1.5.9. experimental buid started to functioning as it should in the frst try...
Question: Is this output power level normal (webUI-cannot change), I think it is too high and why the iwconfig report different power level?

Thanks for the effort, after 3,4 hours of flashing/reflashing/reconfiguring the 1.5.9. experimental buid started to functioning as it should in the frst try...
Question: Is this output power level normal (webUI-cannot change), I think it is too high and why the iwconfig report different power level?

Code: Select all
root@Gargoyle:~# iwconfig wlan0-1
wlan0-1 IEEE 802.11bgn ESSID:"OSNOVNA"
Mode:Managed Frequency:2.412 GHz Access Point: 00:26:44:77:1E:02
Bit Rate=54 Mb/s Tx-Power=17 dBm
RTS thr:off Fragment thr:off
Encryption key:off
Power Management:off
Link Quality=57/70 Signal level=-53 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:8 Invalid misc:8540 Missed beacon:0
root@Gargoyle:~#
Re: 1.5.9. client-bridge-repeater
@pbix can you plase recheck?
I have found a bug within this build...
SITUATION (as before):
Primary router is wifi adsl router (PPPoE client) -> 10.3.2.1/24
WZR-HP-G300NH (buffalo) is (client-bridge-repeater to primary) -> 10.3.2.2/24 with -> GW/DNS -> 10.3.2.1
Wired to buffalo is dreambox (linux STB)
my laptop is wireless client to buffalo and both of them can get to NET via DHCP/DNS, so far so good.
BUG DESCRIPTION:
Dreambox is not accessible from my laptop???
If my laptop is wired to buffalo then dreambox is accessible...
HELP please!!!
I have found a bug within this build...
SITUATION (as before):
Primary router is wifi adsl router (PPPoE client) -> 10.3.2.1/24
WZR-HP-G300NH (buffalo) is (client-bridge-repeater to primary) -> 10.3.2.2/24 with -> GW/DNS -> 10.3.2.1
Wired to buffalo is dreambox (linux STB)
my laptop is wireless client to buffalo and both of them can get to NET via DHCP/DNS, so far so good.
BUG DESCRIPTION:
Dreambox is not accessible from my laptop???
If my laptop is wired to buffalo then dreambox is accessible...
HELP please!!!