[TST] TP-Link WDR4300 - Testing Support

Discuss the technical details of Gargoyle and ongoing development

Moderator: Moderators

Post Reply
flakattack
Posts: 1
Joined: Fri Aug 24, 2012 8:03 pm

[TST] TP-Link WDR4300 - Testing Support

Post by flakattack »

Good Morning / Evening Forum,

I have just picked up the TP-Link WDR4300 wireless router, and it is pretty awesome!

Testing OpenWRT on it at the moment and from initial tests it seems quite stable. Looking to push it further I want to see if I can get gargoyle to work.

So went to this page: http://www.gargoyle-router.com/wiki/dok ... f_packages

However noticed that the instructions are quite out of date.
Then started to search the net and stumbled upon this: http://engeresting.blogspot.com.au/2011 ... -1003.html

Tried to follow this guide but still no avail :(

So what I am asking is, is there something blatantly obvious I have missed? I mean is there a page somewhere here that gives me all this info?

In Summary:
What I am after:
  • A list of packages that need to be installed
  • Any additional configuration that needs to be performed
I guess that is it. Oh and I guess this is sort of important: I am currently using: Backfire [ATTITUDE ADJUSTMENT (Bleeding Edge, r33235)]

wilsonhlacerda
Posts: 20
Joined: Mon Mar 08, 2010 5:47 pm

Re: [TST] TP-Link WDR4300 - Testing Support

Post by wilsonhlacerda »

:shock:
Nice and cheap router! Think it'll be my next one!
128MB RAM
8MB FLASH
2 USB
2.4Ghz + 5Ghz Simultaneous
CPU 560MHz AR9344
US$70 to US$100 almost worldwide

MUCH better than wr1043nd for only a few bucks more.
This one does deserve Gargoyle firmware images. ;)

OpenWrt Wiki:
http://wiki.openwrt.org/toh/tp-link/tl-wdr4300

pbix
Developer
Posts: 1373
Joined: Fri Aug 21, 2009 5:09 pm

Re: [TST] TP-Link WDR4300 - Testing Support

Post by pbix »

OpenWRT support for this router is only in trunk. Gargoyle works with released versions of OpenWRT.

Rumors abound that the next release of OpenWRT "Attitude Adjustment" is imminent. Expect Gargoyle releases short there after.
Linksys WRT1900ACv2
Netgear WNDR3700v2
TP Link 1043ND v3
TP-Link TL-WDR3600 v1
Buffalo WZR-HP-G300NH2
WRT54G-TM

wilsonhlacerda
Posts: 20
Joined: Mon Mar 08, 2010 5:47 pm

Re: [TST] TP-Link WDR4300 - Testing Support

Post by wilsonhlacerda »

pbix wrote:OpenWRT support for this router is only in trunk. Gargoyle works with released versions of OpenWRT.

Rumors abound that the next release of OpenWRT "Attitude Adjustment" is imminent. Expect Gargoyle releases short there after.
pbix thanks for reply!
Yes, I know Gargoyle only support released openwrt. That's a good strategy.
Please just not forget to add WDR4300 as soon as it is released ;) , probably it'll be a very demanding model next months.

By the way, is there any updated tutorial of how to install Gargoyle as packages (on top of openwrt trunk)? Could only find this:
http://www.gargoyle-router.com/wiki/dok ... f_packages
I have not tried it in fact, but I read in forum that it is not not functional.

wilsonhlacerda
Posts: 20
Joined: Mon Mar 08, 2010 5:47 pm

Re: [TST] TP-Link WDR4300 - Testing Support

Post by wilsonhlacerda »

Have anyone tried Gargoyle v1.5.7 (or newer) on TP-LINK WDR4300 or WDR4310?

Which hardware version? v1.0, 1.1, 1.2....?
Any comments?

I don't have one (yet), nice to hear from people that have already tried. Thanks.

User avatar
DoesItMatter
Moderator
Posts: 1373
Joined: Thu May 21, 2009 3:56 pm

Re: [TST] TP-Link WDR4300 - Testing Support

Post by DoesItMatter »

gargoyle_1.5.7-ar71xx-generic-tl-wdr4300-v1-squashfs-factory.bin c8eef2f2eebc24ad29478ef27d064f85
gargoyle_1.5.7-ar71xx-generic-tl-wdr4300-v1-squashfs-sysupgrade.bin 7a56002a6c507bcd3a5532c620fbbdb4

The images already exist for this router - note that there is a
V1 and V1.1 - if you have the V1 - you should be able to flash this
and test for yourself.

http://wiki.openwrt.org/toh/tp-link/tl-wdr4300

Has instructions on how to recover if for some reason the flash
doesn't work for you.

The TL-WDR4310 also has V1 firmware images and should work as well.

I would NOT try to install Gargoyle as a set of packages because it
involves a lot of work and editing/tweaking on your part to get
it working correctly - much easier and safer to flash the firmware.
:twisted: Soylent Green Is People! :twisted:
2x Asus RT-N16 = Asus 3.0.0.4.374.43 Merlin
2x Buffalo WZR-HP-G300NH V1 A0D0 = Gargoyle 1.9.x / LEDE 17.01.x
2x Engenius - ESR900 Stock 1.4.0 / OpenWRT Trunk 49400

bali
Posts: 1
Joined: Sat Feb 09, 2013 12:38 am
Contact:

Re: [TST] TP-Link WDR4300 - Testing Support

Post by bali »

I bought the TP-Link WDR 4300 in the reverse auction on this site.

Cool router. Thanks Uniterm.

I am having issues with the media server though, and am having quite inconsistent behavior.

I first tested it, got it up and running in no time - could access the media no problem. I had to do a proper install, so took it down etc, set it up clean, proper wiring etc. Didnt change the settings. This time around can see the folders on the media server, but none of the content.

No stress, decide I will use a different HDD, plug that in, same problem. Unplug it, connect it to the second USB port, setup the folders and bobs your uncle, its working.

I rebooted the router to change the security settings, and back to the same problem, can see the media server, and the folders, but no content.

Then I tried putting the security settings back to the original way. I tried swapping the USB port again etc - no luck.

Anybody has some suggestions on how to resolve or what I could be doing wrong?

lioux
Posts: 5
Joined: Sun May 26, 2013 3:42 pm

Re: [TST] TP-Link WDR4300 - Testing Support

Post by lioux »

I have one and it's working like a charm with Gargoyle 1.5.10.

smyr
Posts: 17
Joined: Thu May 30, 2013 11:17 pm

Re: [TST] TP-Link WDR4300 - Testing Support

Post by smyr »

Same here! Working flawless after flashing my 4300v1. Havent tried all the options yet however but so far no complaints. :D Great router btw, recommend it!
Netgear R85000 - Netgear original firmware
Linksys WRT1900ACv2 - Gargoyle 1.11.X
TP-Link TL-WR1043N/ND v2 - Gargoyle 1.10.X
ASUS RT-AC66U - Merlin LTS 374.43_2
Netgear R7000 - Lede/Openwrt 18.06.0

yc3948
Posts: 164
Joined: Sat Sep 10, 2011 1:04 am

Re: [TST] TP-Link WDR4300 - Testing Support

Post by yc3948 »

Device Name:Gargoyle
Gargoyle Version:1.6.0
Model:TP-Link TL-WDR4310 v1
Device Configuration:Gateway
Memory Usage:16.1MB / 123.7MB (13%)
Connections:132/4096
CPU Load Averages:1.02 / 0.45 / 0.17 (1/5/15 minute)

HW: V1.1

I test form 1.5.9 to 1.6.0, it only about 1 MBytes Total(the 1.6.0 is biggest 1.438 MBytes Total), anyone have the issues same as me? how can I fix it? Thanks
Buffalo WZR-HP-G300NH2 DD-WRT v24SP2-MULTI (10/31/11) std
Buffalo WZR-HP-G300NH Gargoyle 1.5.9+1f082daf
Linksys WRT54GL Gargoyle 1.4.4
TP-Link TL-WR1043ND Gargoyle 1.5.9+1f082daf

Post Reply