Hi,
I tried to upgrade the firmware. After upgrade I can't get back into the gargoyle router after enabed WLAN and changed ethernet port to WAN.
I can see the AP on wireless, but I can not get pass the login page. After a while the WLAN light will dim and I can't see the AP anymore.
Is there a way I can reset the Gargoyle router externally with the reset button?
Both LAN and WLAN do not work..
Hardware reset
Moderator: Moderators
Hardware reset
Last edited by ruriruri on Fri Nov 26, 2010 8:19 pm, edited 1 time in total.
- DoesItMatter
- Moderator
- Posts: 1373
- Joined: Thu May 21, 2009 3:56 pm
Re: Hardware reset
http://www.gargoyle-router.com/phpbb/vi ... =969#p4701
See my post in that thread
What hardware device are you trying to reset?
See my post in that thread
What hardware device are you trying to reset?
Soylent Green Is People!
2x Asus RT-N16 = Asus 3.0.0.4.374.43 Merlin
2x Buffalo WZR-HP-G300NH V1 A0D0 = Gargoyle 1.9.x / LEDE 17.01.x
2x Engenius - ESR900 Stock 1.4.0 / OpenWRT Trunk 49400
2x Asus RT-N16 = Asus 3.0.0.4.374.43 Merlin
2x Buffalo WZR-HP-G300NH V1 A0D0 = Gargoyle 1.9.x / LEDE 17.01.x
2x Engenius - ESR900 Stock 1.4.0 / OpenWRT Trunk 49400
Re: Hardware reset
Gargoyle Router made by Eric. So it's La Fonera.
- DoesItMatter
- Moderator
- Posts: 1373
- Joined: Thu May 21, 2009 3:56 pm
Re: Hardware reset
I believe Eric did program the reset buttons for those devices.
If you cannot get into the device with a hardware reset, you
could always try and use Fon-Flash to re-flash the device.
That will reset everything back to defaults when you do that.
If you cannot get into the device with a hardware reset, you
could always try and use Fon-Flash to re-flash the device.
That will reset everything back to defaults when you do that.
Soylent Green Is People!
2x Asus RT-N16 = Asus 3.0.0.4.374.43 Merlin
2x Buffalo WZR-HP-G300NH V1 A0D0 = Gargoyle 1.9.x / LEDE 17.01.x
2x Engenius - ESR900 Stock 1.4.0 / OpenWRT Trunk 49400
2x Asus RT-N16 = Asus 3.0.0.4.374.43 Merlin
2x Buffalo WZR-HP-G300NH V1 A0D0 = Gargoyle 1.9.x / LEDE 17.01.x
2x Engenius - ESR900 Stock 1.4.0 / OpenWRT Trunk 49400
Re: Hardware reset
Can you remind me what is the reset procedure that Eric build in?
I have tried holding on to the reset button for a long time.
I haven't try 30/30/30 reset, because I bricked some router before.
I have tried holding on to the reset button for a long time.
I haven't try 30/30/30 reset, because I bricked some router before.
Re: Hardware reset
Is there a proper setup package for FON-flash?
I am missing a lot of dlls and I can't seem to run FON-flash
I am missing a lot of dlls and I can't seem to run FON-flash
- DoesItMatter
- Moderator
- Posts: 1373
- Joined: Thu May 21, 2009 3:56 pm
Re: Hardware reset
fon-flash-windows.zip
I just use that version in Windows
Shouldn't need any other DLL's
Just download that, extract, and run - should be 1 executable file
As far as 30-30-30 reset - I thought only some broadcom's bricked
Not sure if any Atheros devices ever bricked with that.
But for Atheros - I think you just need to hold reset for 30 seconds.
I just use that version in Windows
Shouldn't need any other DLL's
Just download that, extract, and run - should be 1 executable file
As far as 30-30-30 reset - I thought only some broadcom's bricked
Not sure if any Atheros devices ever bricked with that.
But for Atheros - I think you just need to hold reset for 30 seconds.
Soylent Green Is People!
2x Asus RT-N16 = Asus 3.0.0.4.374.43 Merlin
2x Buffalo WZR-HP-G300NH V1 A0D0 = Gargoyle 1.9.x / LEDE 17.01.x
2x Engenius - ESR900 Stock 1.4.0 / OpenWRT Trunk 49400
2x Asus RT-N16 = Asus 3.0.0.4.374.43 Merlin
2x Buffalo WZR-HP-G300NH V1 A0D0 = Gargoyle 1.9.x / LEDE 17.01.x
2x Engenius - ESR900 Stock 1.4.0 / OpenWRT Trunk 49400
-
- Posts: 12
- Joined: Wed Aug 06, 2014 7:03 am
Re: Hardware reset
thanks for the list guys. it'll really help me.
dubli
dubli