Page 1 of 1
WRT-160N V3 & WRT310N
Posted: Tue Oct 05, 2010 5:48 pm
by martymoose
Hi I have 1 of each of these routers
both have dd-wrt install
i would love to update them but it looks like i carnt
If sombody wants to point me in the right direction to install
i am happy to test and and if it bricks oh well
ps the wrt-160n was in our local shop in the bargin bin for $20 aud
i bought 5 4 are in service with dd-wrt
cheers marty
Re: WRT-160N V3 & WRT310N
Posted: Wed Oct 06, 2010 5:18 am
by DoesItMatter
Chipset Broadcom4785
* DD-WRT Wiki: Linksys WRT310N v1.0
RAM 32 MB
FLASH 4 MB
-----------------------------
You should be able to flash this one with the generic broadcom
gargoyle_1.3.5-brcm-2.4-squashfs.trx
Should be able to flash on the WRT310N v1.0
It HAS to be v1.0 - if you have a WRT310N v2.0 - don't flash Gargoyle...
---------------------------------
For the WRT-160N V3's
Chipset BCM4716
* DD-WRT Wiki: Linksys WRT150N & WRT160N
RAM 32 MB
FLASH 4 MB
I show these require K26 builds on DD-WRT - so they require
newer switch drivers and I'm not sure if those are in Backfire.
This would be something one of the developers and/or Eric
might know or be able to chime in on?
----------------------
Best bet to try Gargoyle is the WRT310N as long as its V1 hardware
Re: WRT-160N V3 & WRT310N
Posted: Wed Oct 06, 2010 6:14 am
by martymoose
tried the wrt310n
well looks like it got bricked
it boots but thats it
looking a bit further into it
the 160n well that for later
Re: WRT-160N V3 & WRT310N
Posted: Wed Oct 06, 2010 6:36 am
by DoesItMatter
http://www.dd-wrt.com/wiki/index.php/Re ... ys_WRT310N
Try that on the WRT310N
It is a V1 right?
V2 won't work currently - not even with DD-WRT.
Re: WRT-160N V3 & WRT310N
Posted: Wed Aug 06, 2014 11:24 am
by Ysdadsdslo
I really liked this information.
dubli