Page 1 of 1

PPPoE doesn't work in TL-WDR4300

Posted: Wed Oct 21, 2015 7:40 am
by LMP
Hey...

My TL-WDR4300 was working very well in 1.6.2, but in 1.8.0 the PPPoE doesn't work.

System log:

Code: Select all

Wed Oct 21 09:38:30 2015 daemon.notice netifd: wan (8388): sh: 3 5: bad number
Wed Oct 21 09:38:30 2015 daemon.info pppd[8421]: Plugin rp-pppoe.so loaded.
Wed Oct 21 09:38:30 2015 daemon.info pppd[8421]: RP-PPPoE plugin version 3.8p compiled against pppd 2.4.7
Wed Oct 21 09:38:30 2015 daemon.notice pppd[8421]: pppd 2.4.7 started by root, uid 0
Wed Oct 21 09:38:45 2015 daemon.warn pppd[8421]: Timeout waiting for PADO packets
Wed Oct 21 09:38:45 2015 daemon.err pppd[8421]: Unable to complete PPPoE Discovery
Wed Oct 21 09:38:45 2015 daemon.info pppd[8421]: Exit.
Wed Oct 21 09:38:45 2015 daemon.notice netifd: Interface 'wan' is now down
Wed Oct 21 09:38:45 2015 daemon.notice netifd: Interface 'wan' is disabled
Wed Oct 21 09:38:45 2015 daemon.notice netifd: Interface 'wan' is enabled
Wed Oct 21 09:38:45 2015 daemon.notice netifd: Interface 'wan' is setting up now
Wed Oct 21 09:38:45 2015 daemon.notice netifd: VLAN 'eth0.2' link is down
Wed Oct 21 09:38:45 2015 daemon.notice netifd: Interface 'wan' has link connectivity loss
Wed Oct 21 09:38:45 2015 daemon.notice netifd: VLAN 'eth0.2' link is up
Wed Oct 21 09:38:45 2015 daemon.notice netifd: Interface 'wan' has link connectivity 
Wed Oct 21 09:38:46 2015 daemon.notice netifd: wan (8434): sh: 3 5: bad number
Wed Oct 21 09:38:46 2015 daemon.info pppd[8467]: Plugin rp-pppoe.so loaded.
Wed Oct 21 09:38:46 2015 daemon.info pppd[8467]: RP-PPPoE plugin version 3.8p compiled against pppd 2.4.7
Wed Oct 21 09:38:46 2015 daemon.notice pppd[8467]: pppd 2.4.7 started by root, uid 0
Wed Oct 21 09:39:01 2015 daemon.warn pppd[8467]: Timeout waiting for PADO packets
Wed Oct 21 09:39:01 2015 daemon.err pppd[8467]: Unable to complete PPPoE Discovery
Wed Oct 21 09:39:01 2015 daemon.info pppd[8467]: Exit.
Wed Oct 21 09:39:01 2015 daemon.notice netifd: Interface 'wan' is now down
Wed Oct 21 09:39:01 2015 daemon.notice netifd: Interface 'wan' is disabled
Wed Oct 21 09:39:01 2015 daemon.notice netifd: Interface 'wan' is enabled
Wed Oct 21 09:39:01 2015 daemon.notice netifd: Interface 'wan' is setting up now
Wed Oct 21 09:39:01 2015 daemon.notice netifd: VLAN 'eth0.2' link is down
Wed Oct 21 09:39:01 2015 daemon.notice netifd: Interface 'wan' has link connectivity loss
Wed Oct 21 09:39:01 2015 daemon.notice netifd: VLAN 'eth0.2' link is up
Wed Oct 21 09:39:01 2015 daemon.notice netifd: Interface 'wan' has link connectivity 
Wed Oct 21 09:39:01 2015 daemon.notice netifd: wan (8480): sh: 3 5: bad number
Wed Oct 21 09:39:01 2015 daemon.info pppd[8509]: Plugin rp-pppoe.so loaded.
Wed Oct 21 09:39:01 2015 daemon.info pppd[8509]: RP-PPPoE plugin version 3.8p compiled against pppd 2.4.7
Wed Oct 21 09:39:01 2015 daemon.notice pppd[8509]: pppd 2.4.7 started by root, uid 0
Wed Oct 21 09:39:16 2015 daemon.warn pppd[8509]: Timeout waiting for PADO packets
Wed Oct 21 09:39:16 2015 daemon.err pppd[8509]: Unable to complete PPPoE Discovery
Wed Oct 21 09:39:16 2015 daemon.info pppd[8509]: Exit.
Wed Oct 21 09:39:16 2015 daemon.notice netifd: Interface 'wan' is now down
Wed Oct 21 09:39:16 2015 daemon.notice netifd: Interface 'wan' is disabled
Wed Oct 21 09:39:16 2015 daemon.notice netifd: Interface 'wan' is enabled
Wed Oct 21 09:39:16 2015 daemon.notice netifd: Interface 'wan' is setting up now
Wed Oct 21 09:39:16 2015 daemon.notice netifd: VLAN 'eth0.2' link is down
Wed Oct 21 09:39:16 2015 daemon.notice netifd: Interface 'wan' has link connectivity loss
Wed Oct 21 09:39:16 2015 daemon.notice netifd: VLAN 'eth0.2' link is up
Wed Oct 21 09:39:16 2015 daemon.notice netifd: Interface 'wan' has link connectivity 
Wed Oct 21 09:39:16 2015 daemon.notice netifd: wan (8526): sh: 3 5: bad number
Wed Oct 21 09:39:16 2015 daemon.info pppd[8559]: Plugin rp-pppoe.so loaded.
Wed Oct 21 09:39:16 2015 daemon.info pppd[8559]: RP-PPPoE plugin version 3.8p compiled against pppd 2.4.7

Re: PPPoE doesn't work in TL-WDR4300

Posted: Wed Oct 21, 2015 8:21 am
by Lantis
Did you do a fresh flash or keep your settings from 1.6.2?
Nothing changed in relation to PPPoE in regards to gargoyle between those versions.

Re: PPPoE doesn't work in TL-WDR4300

Posted: Wed Oct 21, 2015 8:32 am
by LMP
Lantis wrote:Did you do a fresh flash or keep your settings from 1.6.2?
Nothing changed in relation to PPPoE in regards to gargoyle between those versions.

Fresh flash and 30/30/30 reset...

Re: PPPoE doesn't work in TL-WDR4300

Posted: Wed Oct 21, 2015 9:15 am
by ispyisail
30/30/30 reset...
does nothing

google "openwrt failsafe"

Re: PPPoE doesn't work in TL-WDR4300

Posted: Wed Oct 28, 2015 10:40 am
by LMP
ispyisail wrote:
30/30/30 reset...
does nothing

google "openwrt failsafe"
I've done everything, everything works normally except PPPoE, back to 1.6.2. = (

Re: PPPoE doesn't work in TL-WDR4300

Posted: Wed Oct 28, 2015 8:32 pm
by nworbnhoj
Strange I have PPPoE (Wired) working without a hitch on
TL-WDR3600 : Gargoyle 1.8.0 : NBN FixedWireless

A simple issue maybe? bad cable? Connection between Modem LAN port and Gargoyle WAN port? username/password type?

Re: PPPoE doesn't work in TL-WDR4300

Posted: Fri Oct 30, 2015 1:49 pm
by LMP
nworbnhoj wrote:Strange I have PPPoE (Wired) working without a hitch on
TL-WDR3600 : Gargoyle 1.8.0 : NBN FixedWireless

A simple issue maybe? bad cable? Connection between Modem LAN port and Gargoyle WAN port? username/password type?
It's works on 1.6.2...

Re: PPPoE doesn't work in TL-WDR4300

Posted: Fri Oct 30, 2015 6:30 pm
by Chilling_Silence
Testing PPPoE (Wired) on 1.8 also works just fine here.