Page 29 of 30
Re: Successfully flashed a router? Tell Us!
Posted: Sat Oct 26, 2019 11:14 am
by Volaris
I bought a $20 GL.iNET GL-MT300N-V2 from Amazon. I bought it after I saw I could flash it to Gargoyle using the Polish Gargoyle PL image (one click to switch to English). It's just an upgrade file since it comes pre-installed with OpenWRT.
https://dl.eko.one.pl/gargoyle-pl/openw ... ps/mt76x8/
It's been running fine without any issues for a little over a week. I'll provide an update if I run into any issues.
For being a mini travel router, range is fine. After it asked me to select my country, it let me put transmit power to 30 dBm and it covers my two story home just fine.
Re: Successfully flashed a router? Tell Us!
Posted: Wed Apr 08, 2020 2:12 pm
by Rafagelido
Perfect tplink c7 ac1750 v2, since last stock bios eu from tplink
Re: Successfully flashed a router? Tell Us!
Posted: Sun Jun 07, 2020 10:08 am
by ajliberty
Hi
I was hoping to use the MT300N-V2 as a VPN client while traveling... but no such luck -- VPN seems to be completely missing...
I realize this model is unsupported - but is there something I'm overlooking? Or does this version just NOT have any VPN capability (either as a server or client)
Thanks so much.
AJ
Re: Successfully flashed a router? Tell Us!
Posted: Sun Jun 07, 2020 11:28 am
by Volaris
ajliberty wrote: ↑Sun Jun 07, 2020 10:08 am
Hi
I was hoping to use the MT300N-V2 as a VPN client while traveling... but no such luck -- VPN seems to be completely missing...
I realize this model is unsupported - but is there something I'm overlooking? Or does this version just NOT have any VPN capability (either as a server or client)
Thanks so much.
AJ
Might not be installed. Go to Settings, Plugins, then click Refresh Plugins. OpenVPN should be in there (among many other things)
However if your main goal is just to use it for VPN while traveling, the default (openwrt based) firmware has built in VPN options as well.
Re: Successfully flashed a router? Tell Us!
Posted: Wed Jun 10, 2020 9:16 am
by ajliberty
I appreciate the help, very much - - however, refreshing the Plugins does me not good - I do have internet through this router, as this is how i'm posting (it's a secondary, slave, on my network... here is a printout of my "opkg update" command (sorry, if I'm being a little slow):
root@Travel_02:~# opkg update
Downloading package list for eko1_routing source...
WARNING: Could not retrieve package list for eko1_routing.
Downloading package list for gargoyle_base source...
WARNING: Could not retrieve package list for gargoyle_base.
Downloading package list for eko1_packages source...
WARNING: Could not retrieve package list for eko1_packages.
Downloading package list for test source...
WARNING: Could not retrieve package list for test.
Downloading package list for gargoyle_kmods source...
WARNING: Could not retrieve package list for gargoyle_kmods.
Downloading package list for openwrt_telephony source...
WARNING: Could not retrieve package list for openwrt_telephony.
Downloading package list for openwrt_luci source...
WARNING: Could not retrieve package list for openwrt_luci.
Downloading package list for openwrt_packages source...
WARNING: Could not retrieve package list for openwrt_packages.
Downloading package list for openwrt_routing source...
WARNING: Could not retrieve package list for openwrt_routing.
Downloading package list for eko1_luci source...
WARNING: Could not retrieve package list for eko1_luci.
Downloading package list for gargoyle_pl source...
WARNING: Could not retrieve package list for gargoyle_pl.
Downloading package list for openwrt_base source...
WARNING: Could not retrieve package list for openwrt_base.
Downloading package list for eko1_telephony source...
WARNING: Could not retrieve package list for eko1_telephony.
Downloading package list for eko1_base source...
WARNING: Could not retrieve package list for eko1_base.
Thank You, in advance!!
Re: Successfully flashed a router? Tell Us!
Posted: Wed Jun 10, 2020 9:30 am
by ajliberty
oops... nevermind - - I did a quick reinstall of the software and it now gives me the updates... sorry for the fire drill - thanks anyway!!
Re: Successfully flashed a router? Tell Us!
Posted: Thu Jul 16, 2020 4:26 am
by arthng
Flashed 1.12.0 on TP-Link Archer C7(US) v5. Used it for a day with multiple 2.4Ghz and 5Ghz clients - no issues no report.
Re: Successfully flashed a router? Tell Us!
Posted: Wed Aug 05, 2020 4:14 am
by danielgrant007
this is my first post. Thanks for this great software.
Give a new life to my nanostation2, flashed with 1.4.7.
after a quick learning curve on "resetting +tftp "
Have now flashed also a TP-LINK WR741ND v4.22 via web. bin file must been on root to get upload to the router.
Re: Successfully flashed a router? Tell Us!
Posted: Fri Aug 07, 2020 3:25 pm
by wbennett88
Flashed 1.12.0 on TP-Link Archer C7 V2 that was on stock firmware. Using the router as a dumb AP and it has been rock solid with no disconnections.
Re: Successfully flashed a router? Tell Us!
Posted: Mon Sep 14, 2020 12:39 pm
by raven
Version: Gargoyle 1.12.x final
Device:Gl-AR150
Running well and stable as gateway using usb modem E3372 and usb flash drive 2GB for swap and adblock plugins database