Page 17 of 30
Re: Successfully flashed a router? Tell Us!
Posted: Thu Apr 02, 2015 1:52 pm
by Schnurzel
Router: TL-WR1043ND v1.8
Firmware: gargoyle_1.7.x-ar71xx-generic-tl-wr1043nd-v1-squashfs-factory.bin
runs good. With OEM firmware i often had WIFI disconnects. Now it runs without issues.
Re: Successfully flashed a router? Tell Us!
Posted: Wed Apr 08, 2015 7:28 pm
by chibuche
Flashed it on a TL-WR1043ND v2.1 successfully!
the firmware I used was gargoyle_1.7.1-ar71xx-generic-tl-wr1043nd-v2-squashfs-factory.bin
Re: Successfully flashed a router? Tell Us!
Posted: Fri Apr 10, 2015 11:21 pm
by iliya
TP-LINK TL-WR841ND ver 8.2 - working great on Gargoyle 1.7.1
Re: Successfully flashed a router? Tell Us!
Posted: Mon Apr 13, 2015 10:30 am
by pepsi82
TP-LINK TL-WR841ND ver 9 work with 1.7.1
Re: Successfully flashed a router? Tell Us!
Posted: Fri May 01, 2015 12:15 am
by dlogictech
Successfully flashed to 1.7.1
D-Link DIR-835 rev. A1
TP-Link TL-WR1043ND Ver. 1.6
TP-Link TL-WR740N Ver. 1.10
Re: Successfully flashed a router? Tell Us!
Posted: Fri May 01, 2015 11:40 am
by apvm
TP-Link 1043ND V1.7
LOL I bought this router in 2011/12 and was going to replace the TP Link 541G but never did because the 541G was solid and served my purpose. Bought a Chromecast lately and found that wireless G can no longer cut it. So flashed the 1043ND with 1.71 and everything is fine. No idea if firmwares from TP link is any good since I flashed Gargoyle 1st thing.
My procedure:
Flashed German stock firmware
Flashed 1.71 factory
Flashed 1.71 upgrade
By the way unable to flash the 1.71 firmware until I shorten the name of the firmwares to 171factory.bin and 171upgrade.bin
Re: Successfully flashed a router? Tell Us!
Posted: Mon May 04, 2015 4:36 am
by simono_pl
TP-LINK TL-WR842ND ver 1 - working great on Gargoyle 1.7.1
Re: Successfully flashed a router? Tell Us!
Posted: Tue May 05, 2015 5:22 pm
by Gr3y
Hello
Just flashed my new WNDR3700v4 successfully with 1.7.1.
Not a hitch.
I've run gargoyle for years now, but my old WNDR3700v1 broke down.
Keep up the good work devs!
Re: Successfully flashed a router? Tell Us!
Posted: Wed May 06, 2015 8:53 pm
by aplima
You can add TL-WA901ND v3 to the list of supported devices
And keep up the great work!
Re: Successfully flashed a router? Tell Us!
Posted: Mon Jun 01, 2015 10:48 am
by 2Tall
Successfully flashed a TP-Link TL-WDR3600 V1 running stock 3.14.1 firmware to Gargoyle 1.7.1. With the exception of maybe slower wireless connections and lower reported signal strength from devices located in a nearby bedroom, everything else seems to be running smoothly. Perhaps a little tweak will fix er right up. The installation went rather flawlessly. I first updated my factory 3.13.34 firmware to 3.14.1 to insure that I was running the latest firmware. I then logged into the router and did a restore to factory default settings for good measure. Next, I shortened the name of the file and successfully uploaded the Gargoyle 1.7.1 firmware. Filtering out IDENT on Port 113 seemed to be a breeze and I'm looking forward to making good use of those bandwidth report charts, graphs and stats. Now, as time permits, address the potential wireless signal/bitrate issues. Thanks for making Open-Wrt an even better product.