Successfully flashed a router? Tell Us!

Report problems and success stories with Gargoyle on various hardware platforms.

Moderator: Moderators

Schnurzel
Posts: 13
Joined: Tue Mar 31, 2015 1:03 pm

Re: Successfully flashed a router? Tell Us!

Postby Schnurzel » Thu Apr 02, 2015 1:52 pm

Router: TL-WR1043ND v1.8
Firmware: gargoyle_1.7.x-ar71xx-generic-tl-wr1043nd-v1-squashfs-factory.bin

runs good. With OEM firmware i often had WIFI disconnects. Now it runs without issues.

chibuche
Posts: 3
Joined: Wed Apr 08, 2015 7:24 pm

Re: Successfully flashed a router? Tell Us!

Postby chibuche » Wed Apr 08, 2015 7:28 pm

Flashed it on a TL-WR1043ND v2.1 successfully!

the firmware I used was gargoyle_1.7.1-ar71xx-generic-tl-wr1043nd-v2-squashfs-factory.bin

iliya
Posts: 4
Joined: Fri Oct 11, 2013 1:00 pm

Re: Successfully flashed a router? Tell Us!

Postby iliya » Fri Apr 10, 2015 11:21 pm

TP-LINK TL-WR841ND ver 8.2 - working great on Gargoyle 1.7.1
TP-LINK TL-WR841ND ver 8.2 - Gargoyle 1.7.1
TP-Link TL-WR842N/ND v1 - Gargoyle 1.7.1

pepsi82
Posts: 12
Joined: Mon Apr 13, 2015 6:13 am

Re: Successfully flashed a router? Tell Us!

Postby pepsi82 » Mon Apr 13, 2015 10:30 am

TP-LINK TL-WR841ND ver 9 work with 1.7.1

User avatar
dlogictech
Posts: 118
Joined: Sat Feb 07, 2015 3:50 pm
Location: Unionville, Ontario. Canada.
Contact:

Re: Successfully flashed a router? Tell Us!

Postby dlogictech » Fri May 01, 2015 12:15 am

Successfully flashed to 1.7.1

D-Link DIR-835 rev. A1
TP-Link TL-WR1043ND Ver. 1.6
TP-Link TL-WR740N Ver. 1.10
D-Link DIR-835 Rev. A1 using Gargoyle
1.9.X (Built 20160524-1903 git@004a64c)

TP-Link TL-WR1043ND Ver. 1.6 using Gargoyle
1.9.1

TP-Link TL-WR740N Ver. 1.10 using Gargoyle
1.9.1

User avatar
apvm
Posts: 97
Joined: Thu Apr 30, 2015 7:30 am

Re: Successfully flashed a router? Tell Us!

Postby apvm » Fri May 01, 2015 11:40 am

TP-Link 1043ND V1.7

LOL I bought this router in 2011/12 and was going to replace the TP Link 541G but never did because the 541G was solid and served my purpose. Bought a Chromecast lately and found that wireless G can no longer cut it. So flashed the 1043ND with 1.71 and everything is fine. No idea if firmwares from TP link is any good since I flashed Gargoyle 1st thing.

My procedure:

Flashed German stock firmware
Flashed 1.71 factory
Flashed 1.71 upgrade

By the way unable to flash the 1.71 firmware until I shorten the name of the firmwares to 171factory.bin and 171upgrade.bin
Last edited by apvm on Tue May 05, 2015 8:45 pm, edited 1 time in total.

simono_pl
Posts: 24
Joined: Mon May 04, 2015 3:26 am

Re: Successfully flashed a router? Tell Us!

Postby simono_pl » Mon May 04, 2015 4:36 am

TP-LINK TL-WR842ND ver 1 - working great on Gargoyle 1.7.1
TP-Link Archer C7 v2 = OpenWrt CC
TP-Link TL-WR842ND v1 = Gargoyle 1.9.X
TL-WA850RE = Gargoyle 1.9.X

Gr3y
Posts: 4
Joined: Wed Jan 23, 2013 12:10 pm

Re: Successfully flashed a router? Tell Us!

Postby Gr3y » Tue May 05, 2015 5:22 pm

Hello

Just flashed my new WNDR3700v4 successfully with 1.7.1.
Not a hitch.

I've run gargoyle for years now, but my old WNDR3700v1 broke down.

Keep up the good work devs!
Last edited by Gr3y on Thu May 07, 2015 10:40 pm, edited 1 time in total.

aplima
Posts: 2
Joined: Mon Apr 27, 2015 10:13 am

Re: Successfully flashed a router? Tell Us!

Postby aplima » Wed May 06, 2015 8:53 pm

You can add TL-WA901ND v3 to the list of supported devices :)

And keep up the great work!
Attachments
tl-wa901nd.png
tl-wa901nd.png (193.68 KiB) Viewed 7116 times

2Tall
Posts: 9
Joined: Mon Jun 01, 2015 9:53 am

Re: Successfully flashed a router? Tell Us!

Postby 2Tall » Mon Jun 01, 2015 10:48 am

Successfully flashed a TP-Link TL-WDR3600 V1 running stock 3.14.1 firmware to Gargoyle 1.7.1. With the exception of maybe slower wireless connections and lower reported signal strength from devices located in a nearby bedroom, everything else seems to be running smoothly. Perhaps a little tweak will fix er right up. The installation went rather flawlessly. I first updated my factory 3.13.34 firmware to 3.14.1 to insure that I was running the latest firmware. I then logged into the router and did a restore to factory default settings for good measure. Next, I shortened the name of the file and successfully uploaded the Gargoyle 1.7.1 firmware. Filtering out IDENT on Port 113 seemed to be a breeze and I'm looking forward to making good use of those bandwidth report charts, graphs and stats. Now, as time permits, address the potential wireless signal/bitrate issues. Thanks for making Open-Wrt an even better product.


Return to “Hardware / Installation Issues”

Who is online

Users browsing this forum: No registered users and 3 guests