Page 1 of 1

Updating from 1.4.7

Posted: Thu Jun 19, 2014 10:44 am
by Urgje
Hi,

It's been a long time since I've been here. Reason; my present 1.4.7 version of the Gargoyle firmware has been running very stable.
Recently I decided to have a look and found out that there have been quite a few updates since then, presently being at version 1.6.1.
Can I flash the latest firmware right away? Or should I go through some intermediate versions? All after creatiing a backup off course. ;)
Looking forward to your replies.

Urgje

Re: Updating from 1.4.7

Posted: Sun Jun 22, 2014 12:31 am
by sajjadhalai
you can update new version.. not to worry..
i always update when a new version released by admin..

Re: Updating from 1.4.7

Posted: Sun Jun 22, 2014 5:15 am
by n0pin
Make sure you don't check "Attempt to Preserve Settings" option when upgrading.

Re: Updating from 1.4.7

Posted: Sun Jun 22, 2014 11:22 am
by Urgje
Hi guys,

Thanks for the replies. I'll go for it later today. And I always let and update overwrite everything and redo the settings later.
Will let you knbow if the update succeeded.

Re: Updating from 1.4.7

Posted: Wed Jul 30, 2014 4:16 am
by KaspBear
Hi,

my first post here. I just want to know how this went out as
I am about to do the same firmware upgrade. It would be nice
to know if this will work out or not.

//B

Re: Updating from 1.4.7

Posted: Wed Jul 30, 2014 5:00 am
by KaspBear
I am sorry for my impatience and for hijacking this thread.

I am trying to upgrade my TL-1043ND from Gargoyle v.1.4.7
to v.1.6.1 using the sysupgrade.bin file. At first it says
'Uploading, please wait' and after a few seconds it changes
to 'Upgrading, please wait.'

Now, I've been patient in this matter, waiting for 5, 15 even
50 minutes and there are no changes made to my router.
I still log in with my old password and the firmware is still
v.1.4.7.

Any ideas?

Thank you in advance

Re: Updating from 1.4.7

Posted: Wed Jul 30, 2014 5:36 pm
by n0pin
Which firmware image are you using to upgrade? Might be worth trying to upgrade on different web browser.

Re: Updating from 1.4.7

Posted: Thu Jul 31, 2014 3:22 am
by KaspBear
Oh, I thought that was obvious, I used the file
gargoyle_1.6.1-ar71xx-generic-alfa-ap96-squashfs-sysupgrade.bin

I will try using another browser. I currently use Chrome.

Thanks for your reply, most appreciated.

/B

Edit: Using IE makes no difference. Still the above mentioned scenario.

Re: Updating from 1.4.7

Posted: Fri Aug 01, 2014 8:21 am
by n0pin
This isn't correct firmware image for upgrading, if you are using TP-Link WR1043ND router.

Use this image, if your router is version 1:
http://www.gargoyle-router.com/download ... pgrade.bin

If your router is version 2, use this image:
http://www.gargoyle-router.com/download ... pgrade.bin