I just finished upgrading router number 3
TP-Link TL-WR1043N/ND v1 to
Gargoyle Version:1.6.1
when I attempt to set the custom transmit power (I don't think my
neighbors 2 miles away need to see my signal ) to
something other than 27 it keeps at custom 27
any ideas works fine on version 2
Thanks
Transmit Custom Power Issue
Moderator: Moderators
- DoesItMatter
- Moderator
- Posts: 1373
- Joined: Thu May 21, 2009 3:56 pm
Re: Transmit Custom Power Issue
That is just a numberfi5ban wrote:I just finished upgrading router number 3
TP-Link TL-WR1043N/ND v1 to
Gargoyle Version:1.6.1
when I attempt to set the custom transmit power (I don't think my
neighbors 2 miles away need to see my signal ) to
something other than 27 it keeps at custom 27
any ideas works fine on version 2
Thanks
The TL1043ND only output 250mw of power max
Even if you set a higher # there is a hardware limitation so anything
that is higher than the hardware can handle = max output power
Soylent Green Is People!
2x Asus RT-N16 = Asus 3.0.0.4.374.43 Merlin
2x Buffalo WZR-HP-G300NH V1 A0D0 = Gargoyle 1.9.x / LEDE 17.01.x
2x Engenius - ESR900 Stock 1.4.0 / OpenWRT Trunk 49400
2x Asus RT-N16 = Asus 3.0.0.4.374.43 Merlin
2x Buffalo WZR-HP-G300NH V1 A0D0 = Gargoyle 1.9.x / LEDE 17.01.x
2x Engenius - ESR900 Stock 1.4.0 / OpenWRT Trunk 49400