BRICKED DIR 615 E4 @ 1.5.11

Report problems and success stories with Gargoyle on various hardware platforms.

Moderator: Moderators

Post Reply
User avatar
ldpinney
Posts: 12
Joined: Fri Jan 21, 2011 10:46 pm

BRICKED DIR 615 E4 @ 1.5.11

Post by ldpinney »

On a working DIR 615 E3 (same as E4 w/ non-removable Ant.)
Sysupgrade to 1.5.11 via the webinterface.

After hooking up the serial console :
jffs2: Too few erase blocks

Used failsafe :
cd /tmp
wget ftp://192.168.1.2/gargoyle_1.5.10-ar71x ... pgrade.bin

sysupgrade gargoyle_1.5.10-ar71xx-generic-dir-615-e4-squashfs-sysupgrade.bin

Result :
Working Again @ 1.5.10

aditya2226
Posts: 1
Joined: Wed Jul 09, 2014 5:31 pm

Re: BRICKED DIR 615 E4 @ 1.5.11

Post by aditya2226 »

hi
i bricked my dir 615 e4 router
now the status is constant orange light(power led)

i can enter the failsafe mode
which means when i press reset button while switching on the router
the power led blinks
and the lan port is enabled green

in this mode
i used static ip
some times im getting pings
but no web interface
tried putty(ssh) no use
plz help me
thanks

User avatar
ericwong
Posts: 430
Joined: Sat Aug 25, 2012 6:15 am
Location: Melbourne, Australia
Contact:

Re: BRICKED DIR 615 E4 @ 1.5.11

Post by ericwong »

fasilsafe uses telnet, not ssh.
Eric Wong

PM me if you need to buy Gargoyle router in Australia/NZ, willing to pay me to help you on your Gargoyle configurations or build custom configured ROM with pre-installed app or try to fix your bricked router. Yes, I am looking for job/work.

Post Reply