Gargoyle Forum

I use my WR1043ND Ver 1.8 with Gargoyle Version:1.5.9.
It was flashed from gargoyle_1.5.9-ar71xx-generic-tl-wr1043nd-v1-squashfs-factory.bin
and works without any problem.

Now I want update to 1.5.10.
I take gargoyle_1.5.10-ar71xx-generic-tl-wr1043nd-v1-squashfs-sysupgrade.bin
chose it on Upgrade Firmware Tab,
chose "Attempt to Preserve Settings"
press "Upgrade Now" button...

And Nothing Happens

I see message "Uploading Firmware"
wait about 15 minutes, then just turn off router

Thanx God, when I turn on router it start normally with old Gargoyle Version:1.5.9.

I take a chance and repeat it ones more without "Attempt to Preserve Settings"
Result is the same.

What's wrong?

Thanks in advance.

It's fantastic!

Just now try ones more.
End everything OK.
Now my Gargoyle Version = 1.5.10

is your v1.8 s/n 12xxxxx series? if so did you upgrade straight to gargoyle or did you downgrade to german firmware first?