TP-link WR841n v8 Failed

Report problems and success stories with Gargoyle on various hardware platforms.

Moderator: Moderators

Post Reply
uneed
Posts: 1
Joined: Fri Jun 14, 2013 7:43 am

TP-link WR841n v8 Failed

Post by uneed »

TP-link WR841n v8 8M/64M

TLL:
## Booting image at 9f020000 ...
Uncompressing Kernel Image ... Too big uncompressed streamLZMA ERROR 1 - must RESET board to recover

User avatar
DoesItMatter
Moderator
Posts: 1373
Joined: Thu May 21, 2009 3:56 pm

Re: TP-link WR841n v8 Failed

Post by DoesItMatter »

http://wiki.openwrt.org/toh/tp-link/tl-wr841nd

Gargoyle is OpenWRT underneath

Gargoyle 1.5.10 has OpenWRT Attitude Adjustment 36669

The WR841N V8's need Trunk builds (newer than A.A. 36669)

You can't flash Gargoyle on these V8 routers, have to wait
:twisted: Soylent Green Is People! :twisted:
2x Asus RT-N16 = Asus 3.0.0.4.374.43 Merlin
2x Buffalo WZR-HP-G300NH V1 A0D0 = Gargoyle 1.9.x / LEDE 17.01.x
2x Engenius - ESR900 Stock 1.4.0 / OpenWRT Trunk 49400

artturnip700
Posts: 3
Joined: Fri Jul 19, 2013 1:13 pm

Re: TP-link WR841n v8 Failed

Post by artturnip700 »

Copied from http://wiki.openwrt.org/toh/tp-link/tl- ... d.versions
v8.x (Intl) 2012-Aug Trunk r33623 DB120

If the TL-WR841N(D) has been supported since trunk r33623, while OpenWrt A.A. was relased at r33625 (source: http://wiki.openwrt.org/about/history), then surely the TL-WR841N(D) must be supported in Attitude Adjustment 12.09?

Post Reply