I managed to brick my TL-WR1043ND Bricked updating to 1.5.3
Now I am in process of getting the serial connection on the router, as per the URL http://wiki.openwrt.org/toh/tp-link/tl-wr1043nd it recommends using DKU-5 usb serial connector but I have managed to acquire DCU-60 serial cable http://pinouts.ru/CellularPhonesCables/ ... nout.shtml
Would it work? Desperate to get my TPlink up
TL-WR1043ND Bricked
Moderator: Moderators
-
- Posts: 27
- Joined: Thu Oct 13, 2011 1:16 pm
TL-WR1043ND Bricked
TL-WR1043ND - Gargoyle 1.5.2
DIR-300 - DD-Wrt v24 preSP2 (Build14896)
DIR-300 - DD-Wrt v24 preSP2 (Build14896)
Re: TL-WR1043ND Bricked
No, it will not work. You will need a TTL->serial(or USB) with a voltage of 3.3V, everything else can damage the board and will properly not provide you with correct data anyway.
Router: TL-WR1043ND - Gargoyle 1.5.4
AP: TL-WR1043ND - Gargoyle 1.5.4
AP: TL-WR1043ND - Gargoyle 1.5.4