I'm brand new to gargoyle, and somewhat new to flashed routers.
The other day I flashed my WRT1200AC v1 from factory to Gargoyle 1.10. I went for the older version because some users reported that 1.12 wasn't working for them.
But then I read elsewhere that 1.12 does work on my router. I'm willing to give it a go-- but is there a simple way to upgrade from 1.10? Maybe a wget from the command line, followed by a power cycle? Do I need to flash back to the stock firmware partition and do a full download? Either way, it's okay if I wipe out settings. I just want to get the latest version installed without bricking my router
Will the latest version 1.12 work on my WRT1200AC V1?
Moderator: Moderators
-
- Posts: 2
- Joined: Mon Feb 24, 2020 5:09 pm
Re: Will the latest version 1.12 work on my WRT1200AC V1?
Hi,
Yes i'd recommend 1.12 for your router.
You can just download the sysupgrade file in a web browser from the Downloads page (https://www.gargoyle-router.com/download.php).
Your router should be this one:
https://www.gargoyle-router.com/downloa ... pgrade.bin
You then go to the System -> Upgrade page in the Gargoyle GUI, upload the file and press upgrade.
When going from 1.10 to 1.12, please do not preserve settings as they will be incompatible.
Yes i'd recommend 1.12 for your router.
You can just download the sysupgrade file in a web browser from the Downloads page (https://www.gargoyle-router.com/download.php).
Your router should be this one:
https://www.gargoyle-router.com/downloa ... pgrade.bin
You then go to the System -> Upgrade page in the Gargoyle GUI, upload the file and press upgrade.
When going from 1.10 to 1.12, please do not preserve settings as they will be incompatible.
http://lantisproject.com/downloads/gargoyle_ispyisail.php for the latest releases
Please be respectful when posting. I do this in my free time on a volunteer basis.
Please be respectful when posting. I do this in my free time on a volunteer basis.