Moin²,
i have a small problem with my WR1043ND an Gargoyle, the Router don´t give any ip to a WLAN connected PC/Mediaclient. Despite that the DHCP Server is activated. Therefore i want back to the Stock firmware.
But in the wiki guide mentioned that therefore will be a firware that has the word "boot" in it ...but i dont find this firmware in the Internet .
Can somebody plz help me (send the firmware or modify?)
Thx rf
WR1043ND back to Stockfirmware
Moderator: Moderators
Re: WR1043ND back to Stockfirmware
Have you fixed the problem yet?
Re: WR1043ND back to Stockfirmware
I've just done this all via the web interface but had to go:
Stock -> Gargoyle-> Open WRT -> DDWRT -> Stock ->stock upgrade
Long and convoluted but it worked. The only "tricky" one is the TP1043ND web revert firmware that you need at the end, otherwise the releases are just the standard ones off the openwrt or ddwrt sites.
PM me if you need the web revert file.
Now I'm just waiting for the next release of Gargoyle and hopefully won't have to go through the whole back to stock procedure again
Stock -> Gargoyle-> Open WRT -> DDWRT -> Stock ->stock upgrade
Long and convoluted but it worked. The only "tricky" one is the TP1043ND web revert firmware that you need at the end, otherwise the releases are just the standard ones off the openwrt or ddwrt sites.
PM me if you need the web revert file.
Now I'm just waiting for the next release of Gargoyle and hopefully won't have to go through the whole back to stock procedure again