Gargoyle Forum

Rvanamb wrote:Reset to default, then manually entered everything. Added my five IP ranges into quotas, and only the first one entered shows up on the quota usage page. So it seems everything is working except using more than one quota.

Please make sure you're entering the IP ranges without spaces around the dash, as reported in this post.

Does it fix the problem?

There are no spaces in my entries so no it does not help.

I’ve just setup a similar scenario, and it is behaving fine.

Are you able to show a screenshot of your settings after you enter them?
Other than this, I’m not sure what I can do for you as it appears fine here.

Here are some pictures. Currently it seems to be working though it did the first time I put them in and then they disappeared from the quota status page. I will keep an eye on it. Hopefully it is just a weird fluke and they stay working.
https://drive.google.com/open?id=1BXcFx ... GKnyrJHOfz

Lantis wrote:Apologies, i have found one more latest build and now uploaded it to my site.
Again, i have tested this one and quotas work fine here.

http://lantisproject.com/gargoyle_custom/mvebu-1.11.x/

I had 2 days trying to install gargoyle but no luck.
DD-wrt, Lede and davidc502 get installed successfully but I need Gargoyle.

Default Gargoyle 1.10 does not get installed probably the issue with the new flash chips, my router is just 2 days old but using your version did the job.
Thank you Lantis!!!

( I also added the plugin source http://lantisproject.com/gargoyle_custo ... x/default/ and now it seems to have all the old plugins.)

You’re welcome.
Just be aware that you’re running beta firmware and there may be some issues.

Lantis wrote:You’re welcome.
Just be aware that you’re running beta firmware and there may be some issues.

Thank you for letting me know.
By the way the build from 2nd June 2018, is stable for almost 2 days.

Please suggest how frequently I should update ?
It seems that almost everyday there is a new build.

Unless I find something critical, it probably isn’t a big deal.
Last night I fixed USB storage sharing with passwords. So if you use this feature it would be a good idea.

hi
I just bought a WRT3200ACM and I tried to install 1.10 version from Gargoyle web site then I tried from your site, but no luck, the router did not load the Gargoyle after the flash (power button just blinking and I got an error that router cannot be find) so I cannot connect to the router; then I tried 1.9 same issue.
My router should be from 2016 ( strange, we are in 2018 but that is on the box) and the firmware version is 1.0.6 186168, how is that possible . I would like to install Gargoyle What you suggest?
thx
oh, I am a little confused: the installation instructions specify that is a .bin file but it is actually .img; I am doing something wrong? Also the upgrade is a .tar file, am I right and both needs to be installed.
Also what you mean by not preserving the previous setting when you do the flash, how you do that, I did not find any info about this can you explain it please?

Just flash the file from my website. There should be no problem with that image. http://lantisproject.com/gargoyle_custom/mvebu-1.11.x/
Make sure you are using the Factory image. The extension does not matter.

Not preserving settings is only relevant when moving between Gargoyle/Openwrt versions. For an initial flash from OEM it does not matter.