Page 1 of 2
Plugin List not updating: plugin-gargoyle-tor missing
Posted: Sat Dec 31, 2016 8:28 am
by portion
Hi,
I wanted to install the plugin-gargoyle-tor, but no (other exept the default installed plugins) are listed in the webinterface.
Running opkg update on the shell reveals:
root@Gargoyle:~# opkg update
Downloading package list for barrier_breaker_routing source...
Package list for barrier_breaker_routing downloaded successfully.
Downloading package list for gargoyle source...
Package list for gargoyle downloaded successfully.
The gargole source is
http://www.gargoyle-router.com/packages ... xx/default.
opkg list shows only the following plugins:
plugin-gargoyle-i18n-English-EN - 1.0.0-1
plugin-gargoyle-openvpn - 1.8.1-1
plugin-gargoyle-usb-printer - 1.8.1-1
plugin-gargoyle-usb-storage - 1.8.1-1
Is it the wrong package source? Or are plugins not included in 1.8.1 anymore and I have to add another source?
Or is the repository down? Because I also get a 404 at
https://www.gargoyle-router.com/gargoyl ... rgoyle-tor and a 403 on
http://www.gargoyle-router.com/packages ... xx/default...
Thanks for your help!
Re: Plugin List not updating: plugin-gargoyle-tor missing
Posted: Sat Dec 31, 2016 2:20 pm
by ispyisail
you need one of the more powerful routers?
Re: Plugin List not updating: plugin-gargoyle-tor missing
Posted: Sat Dec 31, 2016 8:38 pm
by Lantis
What router? And what internet connection setup?
I'd have to downgrade a router to test, but the package repository is still online.
You get a 403 because you're not supposed to poke around there.
The router can grab packages from it no problem.
https://www.gargoyle-router.com/package ... t/Packages
You are allowed to navigate to that file, which shows what is available.
Re: Plugin List not updating: plugin-gargoyle-tor missing
Posted: Sat Dec 31, 2016 10:03 pm
by portion
I am running the TL-WR1043ND v2 firmware on the TL-WR1043ND v3. Same issue with 1.9.1 and 1.8.1.
External USB-Drive is present, recognized and the plugin_path set to the Drive.
Internet connection is wireless through my main router and working. I get no error as you see in my previous post when updating the package sources.
Re: Plugin List not updating: plugin-gargoyle-tor missing
Posted: Sat Dec 31, 2016 10:47 pm
by Lantis
Can you use a browser like Chrome or Firefox and press F12 to bring up the developer console.
Then refresh the page and see if any errors?
Also check a logread after refreshing the page.
Re: Plugin List not updating: plugin-gargoyle-tor missing
Posted: Sun Jan 01, 2017 10:43 am
by portion
I do not think it is a problem of the webinterface.
After using
opkg update on the shell, i get:
root@Gargoyle:/# opkg update
[...]
Downloading package list for gargoyle source...
Package list for gargoyle downloaded successfully.
[...]
root@Gargoyle:/#
But when looking at the /tmp/opkg-lists/gargoyle file, its contents should be the file Lantis directly linked in his earlier post. But my contents are:
root@Gargoyle:/tmp/opkg-lists# cat gargoyle
<html>
<head><title>301 Moved Permanently</title></head>
<body bgcolor="white">
<center><h1>301 Moved Permanently</h1></center>
<hr><center>nginx</center>
</body>
</html>
root@Gargoyle:/tmp/opkg-lists#
The gargoyle source in my /etc/opkg.conf is the default one:
And when I manually do the following in /tmp/opkg-lists/ on the shell:
The packages are found with
opkg list and the Plugin-Page of the webiface.
So it seems to be that opkg or wget do not accept the
301 moved permanently to the new destination. I think you use the 301 to forward to the https version?
Re: Plugin List not updating: plugin-gargoyle-tor missing
Posted: Sun Jan 01, 2017 11:03 am
by portion
This appears to be a double post, but it is a followup and a solution to the problem:
I installed the real wget version as mentioned in
https://wiki.openwrt.org/doc/howto/wget-ssl-certs.
So after
opkg install wget I can now update the gargoyle packages with the 301 forward to SSL.
Updating plugins in webiface also works.
But now, the next problem:
When trying to hit install on the "Tor Anonymizer Support for Gargoyle" on the webiface, it does not get installed.
Logread says:
Sun Jan 1 15:58:17 2017 daemon.err uhttpd[1467]: ERROR: Could not download package obfsproxy
Sun Jan 1 15:58:17 2017 daemon.err uhttpd[1467]: An error occurred during Installation, removing partially installed packages.
Same on the shell:
root@Gargoyle:~# opkg install obfsproxy
Preparing to install the following packages, which will require 21898 bytes:
obfsproxy
Preparing to install package obfsproxy...
Downloading...
ERROR: Could not download package obfsproxy
An error occurred during Installation, removing partially installed packages.
[...]
What todo now?
I also noticed that
opkg -d plugin_root install obfsproxy just pops up the help of the gpkg.
Maybe
df -h is also interesting to you?
root@Gargoyle:~# df -h
Filesystem Size Used Available Use% Mounted on
rootfs 768.0K 536.0K 232.0K 70% /
/dev/root 6.0M 6.0M 0 100% /rom
tmpfs 29.9M 760.0K 29.1M 2% /tmp
/dev/mtdblock3 768.0K 536.0K 232.0K 70% /overlay
overlayfs:/overlay 768.0K 536.0K 232.0K 70% /
tmpfs 512.0K 0 512.0K 0% /dev
/dev/sda1 1.4G 2.2M 1.3G 0% /tmp/usb_mount/0c2351e6-a1ca-4329-b87d-16924d2f5f08
Re: Plugin List not updating: plugin-gargoyle-tor missing
Posted: Sun Jan 01, 2017 5:40 pm
by portion
ok, third post in a row, sorry.
I have to revert the success I reported in my previous post.
Installing the GNU wget with ssl support does not the trick.
gpkg still does not follow the 301.
I just had installed GNU wget AND copied the /var/opkg-lists/Packages file from the repository to /var/opkg-lists/gargolye AND given the https address in opkg.conf, which resulted in an error when gpkg wanted to update and did not overwrite the /var/opkg-lists/gargolye...
So back to the Problem: How do I get gpkg to follow the 301 of the repository instead of downloading the 301-html-error page of ngnix?
Good night and thanks for your help!
-Peter
Re: Plugin List not updating: plugin-gargoyle-tor missing
Posted: Sun Jan 01, 2017 7:11 pm
by jorgecorazondeleon
I have the same problem as portion
router:wr1043nd v1
gargoyle 1.6.2
Re: Plugin List not updating: plugin-gargoyle-tor missing
Posted: Sun Jan 01, 2017 7:12 pm
by Lantis
Thanks for your investigation. I'll look into it