Re: Gargoyle IPv6 Testing
Posted: Fri Aug 13, 2021 9:12 pm
How can I put IPV6 static, in my tests it was only the temporary ip
How can I put IPV6 static, in my tests it was only the temporary ip
Gargoyle Forum
A forum to discuss the Gargoyle web interface for Openwrt
https://www.gargoyle-router.com/phpbb/
Gargoyle IPv6 Testing
Page 6 of 8
How can I put IPV6 static, in my tests it was only the temporary ip
Re: Gargoyle IPv6 Testing
Posted: Wed Jan 19, 2022 5:11 pm
Hello all,
is ipv6 implemented on gargoyle, is it workable on PPPoE IPv4 and IPv6 dual-stack?
is ipv6 implemented on gargoyle, is it workable on PPPoE IPv4 and IPv6 dual-stack?
Re: Gargoyle IPv6 Testing
Posted: Wed Jan 19, 2022 5:58 pm
Yes and yes (to the extent that i can test it)
I went to the effort of setting up a fake pppoe server and it worked fine.
YOU need to debug it if you want your particular connection to work. I sincerely hope that you find a missing setting or a config that needs changing or something, but you need to do this one on your own.
Or maybe you'll get lucky, and someone else will come along with the same problem and they'll fix it.
My suggestion would be, get a working OpenWrt config, copy the /etc/config/network file, set up Gargoyle using the GUI, then paste the working OpenWrt config over the top of it.
It will probably break most of Gargoyle, but if IPv6 suddenly starts working, then we know it is a config issue and we can compare the two and solve it more methodically.
If that doesn't solve it, maybe there are missing firewall entries. Same process.
If that doesn't solve it, maybe a package is missing or something? Compare the two.
I can offer to remotely support this, but it will require repeatedly restarting the network which will knock the connection out. If you can set up a mobile connection or something that lets me configure your router and not lose it every time i restart the network, i will book time on the weekend to work on it with you.
I went to the effort of setting up a fake pppoe server and it worked fine.
YOU need to debug it if you want your particular connection to work. I sincerely hope that you find a missing setting or a config that needs changing or something, but you need to do this one on your own.
Or maybe you'll get lucky, and someone else will come along with the same problem and they'll fix it.
My suggestion would be, get a working OpenWrt config, copy the /etc/config/network file, set up Gargoyle using the GUI, then paste the working OpenWrt config over the top of it.
It will probably break most of Gargoyle, but if IPv6 suddenly starts working, then we know it is a config issue and we can compare the two and solve it more methodically.
If that doesn't solve it, maybe there are missing firewall entries. Same process.
If that doesn't solve it, maybe a package is missing or something? Compare the two.
I can offer to remotely support this, but it will require repeatedly restarting the network which will knock the connection out. If you can set up a mobile connection or something that lets me configure your router and not lose it every time i restart the network, i will book time on the weekend to work on it with you.
Re: Gargoyle IPv6 Testing
Posted: Fri Jan 21, 2022 8:19 am
Finally this problem is solved ipv6 works very well on n PPPoE IPv4 and IPv6 dual-stack!
@Lantis Thank you for your efforts !
@Lantis Thank you for your efforts !
Re: Gargoyle IPv6 Testing
Posted: Fri Jan 21, 2022 8:21 am
That is a relief
Re: Gargoyle IPv6 Testing
Posted: Fri Jan 21, 2022 8:38 am
only downside with gargoyle wrt1900acs v2, 1Gbps internet, 320Mbps download in speed test and uploud 890Mbps, now with ipv6 active!
What's the problem, openwrt doesn't feel any crunch, 60% sirq load with openwrt, and gargoyle brings it to 97% ?!
What's the problem, openwrt doesn't feel any crunch, 60% sirq load with openwrt, and gargoyle brings it to 97% ?!
Re: Gargoyle IPv6 Testing
Posted: Fri Jan 21, 2022 6:07 pm
The bandwidth monitoring will be adding load.
The gargoyle qos implementation uses different algorithms as well.
You might get some performance back by irqbalance? Which if that’s the case I’d consider adding that to future builds for multi core devices
The gargoyle qos implementation uses different algorithms as well.
You might get some performance back by irqbalance? Which if that’s the case I’d consider adding that to future builds for multi core devices
Re: Gargoyle IPv6 Testing
Posted: Sat Jan 22, 2022 1:57 am
how can i add irqbalance to test it?
Code: Select all
opkg update
opkg install irqbalance Re: Gargoyle IPv6 Testing
Posted: Sat Jan 22, 2022 2:14 am
irqbalance
bandwidth monitoring disable
I have 1 Gbps on the wire again
Code: Select all
config irqbalance 'irqbalance'
option enabled '1'
# The default value is 10 seconds
#option interval '10'
# List of IRQ's to ignore
#list banirq '36'
#list banirq '69'
Code: Select all
etc/init.d/bwmon_gargoyle stop
/etc/init.d/bwmon_gargoyle disableRe: Gargoyle IPv6 Testing
Posted: Sat Jan 22, 2022 2:31 am
with active wifi things change a little, on the ipv6 side in speed test the needs remain the same even if i have disabled wifi!
https://www.ziggo.nl/speedtest ipv6!
Download 397.7 Mbps, Upload 243.4 Mbps
https://www.speedtest.net ipv4!
Download Mbps 665.86 - 789 Upload Mbps 791.99 - 895
https://www.ziggo.nl/speedtest ipv6!
Download 397.7 Mbps, Upload 243.4 Mbps
https://www.speedtest.net ipv4!
Download Mbps 665.86 - 789 Upload Mbps 791.99 - 895