Page 6 of 17

Re: Openwrt 19.07 based Gargoyle

Posted: Tue Nov 19, 2019 4:19 pm
by papka__
Hi,

Will ramips build works on Newifi D2? Anyone tried?

Re: Openwrt 19.07 based Gargoyle

Posted: Sun Nov 24, 2019 1:38 pm
by papka__
papka__ wrote:Hi,

Will ramips build works on Newifi D2? Anyone tried?
Answering myself. Yes. Working fine.

Re: Openwrt 19.07 based Gargoyle

Posted: Wed Nov 27, 2019 8:35 am
by RomanHK
@Lantis, regarding Router Turris Omnia:
So I learned that Turris has its own modified packages and will not work with OpenWrt without modification - it is a hardware cripto chip (ATSHA204), a switch (VLAN creation), LED (control + rainbow), SFP port.

Based on this information, you may forget my request to include additional kernel modules - it's unnecessary :cry: , but thank you for your effort.

Re: Openwrt 19.07 based Gargoyle

Posted: Wed Nov 27, 2019 3:55 pm
by Lantis
Thanks for checking

Re: Openwrt 19.07 based Gargoyle

Posted: Sun Dec 01, 2019 2:13 pm
by kintz
Thank you for this build, been waiting for gargoyle support. I've using for 14 days on Archer C6v2 8/64 (ath79), it's working great but no much space available to install plugins (adblock). Maybe in the next build you could remove usb support as this plugin does not have an usb port.

Re: Openwrt 19.07 based Gargoyle

Posted: Mon Dec 02, 2019 4:10 am
by Lantis
How much free space is left on a new flash approximately?
I'll look at this, but I'd like to find more than 1 device which fits this category. A she new subtarget just for 1 device creates a large overhead.

Re: Openwrt 19.07 based Gargoyle

Posted: Mon Dec 02, 2019 5:52 pm
by doug_porsche
I installed quickly on my NETGEAR WNDR3700v4
I dont think my decoder ring is as calibrated as I would like, so sorry if the question is redundant.


Should the adblock plugin work on 1.13?

I tried the following two paths
http://lantisproject.com/gargoyle_1.11. ... arge_nand/

http://lantisproject.com/gargoyle_1.13. ... arge_nand/

after adding the plugin source, I didnt see it listed in the "Plug In" section where I would normally click the install button and then go to the Firewall and enable it.

Re: Openwrt 19.07 based Gargoyle

Posted: Mon Dec 02, 2019 7:09 pm
by Lantis
Install the version from here:
https://lantisproject.com/gargoyle_custom/ar71xx/
And use the plugin folders from there as well. Same name format as you has before, just different location.

I made an update to fix the adblock plugin and I don't think it made it into this version though.
If not I'll do another build it doesn't take that long.

Re: Openwrt 19.07 based Gargoyle

Posted: Mon Dec 02, 2019 8:48 pm
by kintz
On a new flash only 72 kB left. I did install adblock but its not working, thought it was beacuse this "Router storage full (read only) or is mounted in volatile storage (RAM)..." but it's not obviously.
It's okay if stays like this. As long as QoS works im gonna use it. :D
Also, the C6v2 its actually 8/128.

Re: Openwrt 19.07 based Gargoyle

Posted: Mon Dec 02, 2019 11:18 pm
by doug_porsche
Thank you.
Installed for NETGEAR WNDR3700v4's tar from https://lantisproject.com/gargoyle_custom/ar71xx/
and the adblock from https://lantisproject.com/gargoyle_cust ... arge_nand/


Update: but it does seem that Adblock is not working.
it installed and I will start monitoring/testing.