Can someone build for me

Discuss the technical details of Gargoyle and ongoing development

Moderator: Moderators

Post Reply
yamahoto
Posts: 3
Joined: Thu May 09, 2019 2:19 pm

Can someone build for me

Post by yamahoto »

Openwrt runs well on my router, however I really at least need Gargoyle for the http/https monitoring....

Thanks!

Model Linksys Audi (EA3500)
Architecture Feroceon 88FR131 rev 1 (v5l)
Firmware Version OpenWrt 18.06.2 r7676-cddd7b4c77 / LuCI openwrt-18.06 branch (git-19.020.41695-6f6641d)

RomanHK
Posts: 794
Joined: Sat May 04, 2013 4:18 pm
Location: Czech Republik

Re: Can someone build for me

Post by RomanHK »

Gargoyle does not support this architecture (Target: kirkwood).
Turris Omnia with OpenWrt 21.02 - Tested
Linksys WRT3200ACM with Gargoyle 1.13.x
TL-WR1043ND v2 with Gargoyle 1.10.0

http://gargoyle.romanhk.cz custom builds by gargoyle users

yamahoto
Posts: 3
Joined: Thu May 09, 2019 2:19 pm

Re: Can someone build for me

Post by yamahoto »

If openwrt works, why gargoyle doesnt?

RomanHK
Posts: 794
Joined: Sat May 04, 2013 4:18 pm
Location: Czech Republik

Re: Can someone build for me

Post by RomanHK »

yamahoto wrote:If openwrt works, why gargoyle doesnt?
Same question - same answer: viewtopic.php?f=5&p=53207#p53207
Turris Omnia with OpenWrt 21.02 - Tested
Linksys WRT3200ACM with Gargoyle 1.13.x
TL-WR1043ND v2 with Gargoyle 1.10.0

http://gargoyle.romanhk.cz custom builds by gargoyle users

Post Reply