"GL-inet Domino Core" target

Discuss the technical details of Gargoyle and ongoing development

Moderator: Moderators

Post Reply
DESK
Posts: 7
Joined: Tue Mar 06, 2018 7:47 am

"GL-inet Domino Core" target

Post by DESK »

Hello, I'am actually working with OpenWRT in my module, but I found too heavy and I would like to use Gargoyle.

Would be possible to implement the target GL-inet Domino Core to the lastest Gargoyle version?

Thanks in advance.
Jon

Lantis
Moderator
Posts: 6735
Joined: Mon Jan 05, 2015 5:33 am
Location: Australia

Re: "GL-inet Domino Core" target

Post by Lantis »

Being a dev board its use cases are probably pretty limited and not mainstream.
But, i have just tested it and it compiles. So if you want to maintain your own version that is entirely doable.

Here's one you could try to begin with.
http://lantisproject.com/gargoyle_custo ... et-domino/
http://lantisproject.com/downloads/gargoyle_ispyisail.php for the latest releases
Please be respectful when posting. I do this in my free time on a volunteer basis.

DESK
Posts: 7
Joined: Tue Mar 06, 2018 7:47 am

Re: "GL-inet Domino Core" target

Post by DESK »

Lantis wrote:Being a dev board its use cases are probably pretty limited and not mainstream.
But, i have just tested it and it compiles. So if you want to maintain your own version that is entirely doable.

Here's one you could try to begin with.
http://lantisproject.com/gargoyle_custo ... et-domino/
Ok Lantis, thank you so much. I'm gonna try that FW.

ispyisail
Moderator
Posts: 5180
Joined: Mon Apr 06, 2009 3:15 am
Location: New Zealand

Re: "GL-inet Domino Core" target

Post by ispyisail »

also a bit under powered :(

DESK
Posts: 7
Joined: Tue Mar 06, 2018 7:47 am

Re: "GL-inet Domino Core" target

Post by DESK »

Thank you for your responses,

I tested the FW you build and it seems to work fine. The only issue is that the bridge works with relayd in layer 3.

To solve that problem (to turn to layer 2), do you see possible to compile Gargoyle 1.8.1 for the "Domino" target?

Best regards,
Jon

Lantis
Moderator
Posts: 6735
Joined: Mon Jan 05, 2015 5:33 am
Location: Australia

Re: "GL-inet Domino Core" target

Post by Lantis »

Depends on whether the device was supported in Openwrt back in barrier breaker (14.07).
If yes, it should be no problem, but not something I’m going to explore sorry. I leave it to you.
I only provided the above build because i had literally just finished a build which happened to contain it. Happy coincidence :)
http://lantisproject.com/downloads/gargoyle_ispyisail.php for the latest releases
Please be respectful when posting. I do this in my free time on a volunteer basis.

DESK
Posts: 7
Joined: Tue Mar 06, 2018 7:47 am

Re: "GL-inet Domino Core" target

Post by DESK »

Lantis wrote:Depends on whether the device was supported in Openwrt back in barrier breaker (14.07).
If yes, it should be no problem, but not something I’m going to explore sorry. I leave it to you.
I only provided the above build because i had literally just finished a build which happened to contain it. Happy coincidence :)
You have already helped me a lot providing me the 1.11 version, thank you.
Now it's my turn to investigate ;)

Best regards.
Jon

Post Reply