Openwrt 19.07 based Gargoyle

Discuss the technical details of Gargoyle and ongoing development

Moderator: Moderators

papka__
Posts: 10
Joined: Tue Nov 19, 2019 4:07 pm

Re: Openwrt 19.07 based Gargoyle

Postby papka__ » Tue Nov 19, 2019 4:19 pm

Hi,

Will ramips build works on Newifi D2? Anyone tried?

papka__
Posts: 10
Joined: Tue Nov 19, 2019 4:07 pm

Re: Openwrt 19.07 based Gargoyle

Postby papka__ » Sun Nov 24, 2019 1:38 pm

papka__ wrote:Hi,

Will ramips build works on Newifi D2? Anyone tried?


Answering myself. Yes. Working fine.

RomanHK
Posts: 473
Joined: Sat May 04, 2013 4:18 pm
Location: Czech Republik

Re: Openwrt 19.07 based Gargoyle

Postby RomanHK » Wed Nov 27, 2019 8:35 am

@Lantis, regarding Router Turris Omnia:
So I learned that Turris has its own modified packages and will not work with OpenWrt without modification - it is a hardware cripto chip (ATSHA204), a switch (VLAN creation), LED (control + rainbow), SFP port.

Based on this information, you may forget my request to include additional kernel modules - it's unnecessary :cry: , but thank you for your effort.
Turris Omnia with Gargoyle 1.12.0
Linksys WRT3200ACM with Gargoyle 1.12.0
TL-WR1043ND v2 with Gargoyle 1.10.0

Lantis
Moderator
Posts: 5211
Joined: Mon Jan 05, 2015 5:33 am
Location: Australia

Re: Openwrt 19.07 based Gargoyle

Postby Lantis » Wed Nov 27, 2019 3:55 pm

Thanks for checking
Routers: Various ar71xx/mvebu/x86-64
http://lantisproject.com/downloads/gargoyle_ispyisail.php for the latest releases

kintz
Posts: 2
Joined: Sun Dec 01, 2019 2:02 pm

Re: Openwrt 19.07 based Gargoyle

Postby kintz » Sun Dec 01, 2019 2:13 pm

Thank you for this build, been waiting for gargoyle support. I've using for 14 days on Archer C6v2 8/64 (ath79), it's working great but no much space available to install plugins (adblock). Maybe in the next build you could remove usb support as this plugin does not have an usb port.

Lantis
Moderator
Posts: 5211
Joined: Mon Jan 05, 2015 5:33 am
Location: Australia

Re: Openwrt 19.07 based Gargoyle

Postby Lantis » Mon Dec 02, 2019 4:10 am

How much free space is left on a new flash approximately?
I'll look at this, but I'd like to find more than 1 device which fits this category. A she new subtarget just for 1 device creates a large overhead.
Routers: Various ar71xx/mvebu/x86-64
http://lantisproject.com/downloads/gargoyle_ispyisail.php for the latest releases

doug_porsche
Posts: 68
Joined: Fri Aug 16, 2013 3:59 pm

Re: Openwrt 19.07 based Gargoyle

Postby doug_porsche » Mon Dec 02, 2019 5:52 pm

I installed quickly on my NETGEAR WNDR3700v4
I dont think my decoder ring is as calibrated as I would like, so sorry if the question is redundant.


Should the adblock plugin work on 1.13?

I tried the following two paths
http://lantisproject.com/gargoyle_1.11. ... arge_nand/

http://lantisproject.com/gargoyle_1.13. ... arge_nand/

after adding the plugin source, I didnt see it listed in the "Plug In" section where I would normally click the install button and then go to the Firewall and enable it.
NETGEAR WNDR3700v4 or an old Soup can with string. So hard to tell these days.

Lantis
Moderator
Posts: 5211
Joined: Mon Jan 05, 2015 5:33 am
Location: Australia

Re: Openwrt 19.07 based Gargoyle

Postby Lantis » Mon Dec 02, 2019 7:09 pm

Install the version from here:
https://lantisproject.com/gargoyle_custom/ar71xx/
And use the plugin folders from there as well. Same name format as you has before, just different location.

I made an update to fix the adblock plugin and I don't think it made it into this version though.
If not I'll do another build it doesn't take that long.
Routers: Various ar71xx/mvebu/x86-64
http://lantisproject.com/downloads/gargoyle_ispyisail.php for the latest releases

kintz
Posts: 2
Joined: Sun Dec 01, 2019 2:02 pm

Re: Openwrt 19.07 based Gargoyle

Postby kintz » Mon Dec 02, 2019 8:48 pm

On a new flash only 72 kB left. I did install adblock but its not working, thought it was beacuse this "Router storage full (read only) or is mounted in volatile storage (RAM)..." but it's not obviously.
It's okay if stays like this. As long as QoS works im gonna use it. :D
Also, the C6v2 its actually 8/128.

doug_porsche
Posts: 68
Joined: Fri Aug 16, 2013 3:59 pm

Re: Openwrt 19.07 based Gargoyle

Postby doug_porsche » Mon Dec 02, 2019 11:18 pm

Thank you.
Installed for NETGEAR WNDR3700v4's tar from https://lantisproject.com/gargoyle_custom/ar71xx/
and the adblock from https://lantisproject.com/gargoyle_cust ... arge_nand/


Update: but it does seem that Adblock is not working.
it installed and I will start monitoring/testing.
NETGEAR WNDR3700v4 or an old Soup can with string. So hard to tell these days.


Return to “Gargoyle Development”

Who is online

Users browsing this forum: oliver44 and 2 guests