NTFS usb drive very very slow

If your problem doesn't fall into one of the other categories, report it here.

Moderator: Moderators

merlino175
Posts: 12
Joined: Sat Apr 21, 2018 7:02 am

NTFS usb drive very very slow

Post by merlino175 »

hello,
i just installed gargoyle on my tp-link tl-wdr4300.
I love the new firmware, but i have a problem, my ntfs drive is too slow.
write: 2mb/s
read: 4mb/s
cpu usage is less than 1 so i don't understand the reason.
The openwrt forum suggest to disable the "sync" parameter on the mount command.
Is the suggest also valid on the Gargoyle firmware?
Do you have any other suggest to speed up the transfer rate?

thank you for any help

Lantis
Moderator
Posts: 6735
Joined: Mon Jan 05, 2015 5:33 am
Location: Australia

Re: NTFS usb drive very very slow

Post by Lantis »

You can try it. If it works on OpenWrt it will probably work here.
You will get better performance switching to EXT4 format
http://lantisproject.com/downloads/gargoyle_ispyisail.php for the latest releases
Please be respectful when posting. I do this in my free time on a volunteer basis.

merlino175
Posts: 12
Joined: Sat Apr 21, 2018 7:02 am

Re: NTFS usb drive very very slow

Post by merlino175 »

yes, but i don't know how and where to remove the "sync" parameter

Lantis
Moderator
Posts: 6735
Joined: Mon Jan 05, 2015 5:33 am
Location: Australia

Re: NTFS usb drive very very slow

Post by Lantis »

in the nfsd config file (/etc/config/nfsd) there will be an entry for your share with "option sync 1"
You need to change that to 0, and then reboot your router.

There is probably a quicker way than rebooting, but i am not sure how many dependent services you would need to restart to get this going.
http://lantisproject.com/downloads/gargoyle_ispyisail.php for the latest releases
Please be respectful when posting. I do this in my free time on a volunteer basis.

merlino175
Posts: 12
Joined: Sat Apr 21, 2018 7:02 am

Re: NTFS usb drive very very slow

Post by merlino175 »

hi Lantis, my nfsd file is almost empty (1 byte)

Lantis
Moderator
Posts: 6735
Joined: Mon Jan 05, 2015 5:33 am
Location: Australia

Re: NTFS usb drive very very slow

Post by Lantis »

As far as I can see, NTFS-3G uses “async” by default.
You can try modifying /etc/init.d/usb_storage to specify the mount options, but I do not think they are needed.

I can’t offer you further advice, I do not know additional information.
http://lantisproject.com/downloads/gargoyle_ispyisail.php for the latest releases
Please be respectful when posting. I do this in my free time on a volunteer basis.

merlino175
Posts: 12
Joined: Sat Apr 21, 2018 7:02 am

Re: NTFS usb drive very very slow

Post by merlino175 »

is there a way to replace ntfs-3g driver with a better one?
the stock ntfs support of the modem is much more efficient than the gargoyle one, 8 mb/s download and upload.
So i think the bottleneck is the driver, not the modem.

Lantis
Moderator
Posts: 6735
Joined: Mon Jan 05, 2015 5:33 am
Location: Australia

Re: NTFS usb drive very very slow

Post by Lantis »

Welcome to linux ntfs support.
In short, no.
http://lantisproject.com/downloads/gargoyle_ispyisail.php for the latest releases
Please be respectful when posting. I do this in my free time on a volunteer basis.

merlino175
Posts: 12
Joined: Sat Apr 21, 2018 7:02 am

Re: NTFS usb drive very very slow

Post by merlino175 »

ok ntfs is not so good for gargoyle.
is fat32 supported and better than ntfs?
or what else than windows can manage?

Lantis
Moderator
Posts: 6735
Joined: Mon Jan 05, 2015 5:33 am
Location: Australia

Re: NTFS usb drive very very slow

Post by Lantis »

Yes it will be better than ntfs.
That’s about the extent of your options for Windows
http://lantisproject.com/downloads/gargoyle_ispyisail.php for the latest releases
Please be respectful when posting. I do this in my free time on a volunteer basis.

Post Reply