Page 1 of 1

Please Wait While Settings Are Applied

Posted: Mon Jul 10, 2017 3:42 pm
by BatterBits
It seems that every time I make a change to the system - adding a firewall rule for example - when I hit the "save changes" button, it takes a really long time - like 8-10 minutes.
Is there anything I can do to speed this up?

Device Name:Gargoyle
Gargoyle Version:1.9.2
Model:TP-Link TL-WDR3600 v1
Device Configuration:Gateway
Memory Usage:23.6MB / 123.1MB (19.2%)
Connections:315/16384
CPU Load Averages:0.00 / 0.00 / 0.02 (1/5/15 minutes


I've tried a search - but sadly both "save" and "changes" are common words which are not indexed by the system...

Re: Please Wait While Settings Are Applied

Posted: Sat Jul 15, 2017 9:46 pm
by Rooster
I have the same router... and I thought update time was slow at 10 seconds ! openwrt and ddwrt did it more or less instantly, no idea why there's a lag with Gargoyle... but several minutes denotes a problem, I'd try a revert to stock and see if that runs OK, then reflash gargoyle...
If it's still that sluggish, I'd suspect a hardware fault :-(