VPN problem

General discussion about Gargoyle, OpenWrt or anything else even remotely related to the project

Moderator: Moderators

jar229
Posts: 16
Joined: Tue May 12, 2009 5:41 am

VPN problem

Post by jar229 »

Hello:

I have a Router with Gargoyle, with the VPN server installed and running.
On the client computer (a computer with Windows 10) I installed the client openvn.
The connection is successful, but from the client computer can not access computers on the main network.

My network is as follows:

Home Router IP: 10.0.0.1
Gargoyle Router IP: 10.0.0.25

IP VPN: 10.0.0.111

Any idea what could be the problem?

ispyisail
Moderator
Posts: 5180
Joined: Mon Apr 06, 2009 3:15 am
Location: New Zealand

Re: VPN problem

Post by ispyisail »

screen shot of config page please

jar229
Posts: 16
Joined: Tue May 12, 2009 5:41 am

Re: VPN problem

Post by jar229 »

Image

:D

ispyisail
Moderator
Posts: 5180
Joined: Mon Apr 06, 2009 3:15 am
Location: New Zealand

Re: VPN problem

Post by ispyisail »

I dont trust this

Image

use default settings first

router 192.168.1.1
network 192.168.1.x


VPN 10.8.0.1

Image

jar229
Posts: 16
Joined: Tue May 12, 2009 5:41 am

Re: VPN problem

Post by jar229 »

ispyisail wrote:I dont trust this

Image

use default settings first

router 192.168.1.1
network 192.168.1.x


VPN 10.8.0.1

Image

This is not possible. Too many computers and devices to configure.

I put the values by default in the VPN box, and still same, is the only device that I have access to the VPN server.

ispyisail
Moderator
Posts: 5180
Joined: Mon Apr 06, 2009 3:15 am
Location: New Zealand

Re: VPN problem

Post by ispyisail »

I would "fail safe" your router and start again with default values where possiable

ajliberty
Posts: 19
Joined: Sat Dec 31, 2016 3:01 am

Re: VPN problem

Post by ajliberty »

So sorry in advance - I always hate to ask for help.. but I'm stuck - It's been several years now since I last did this successfully... Here are my settings - - I'm using the profiles on an iphone openvpn client to test, with no luck...

The Gargoyle server sits behind my ISP Modem/Router - (is that the problem?)

Otherwise, where am I going wrong? Thanks in advance.

https://photos.app.goo.gl/LWedKM8dzj6WiCSAA
https://photos.app.goo.gl/uZb3kDn7uJM9Phtg7

Lantis
Moderator
Posts: 6735
Joined: Mon Jan 05, 2015 5:33 am
Location: Australia

Re: VPN problem

Post by Lantis »

1. You can't have 2 different clients routing the same subnet
2. It doesn't make sense for an iPhone to have a routed subnet
3. iPhones need "prefers VPN gateway" checked.
4. Make sure port 1194 is forwarded from your modem to Gargoyle if your setup requires it
http://lantisproject.com/downloads/gargoyle_ispyisail.php for the latest releases
Please be respectful when posting. I do this in my free time on a volunteer basis.

ajliberty
Posts: 19
Joined: Sat Dec 31, 2016 3:01 am

Re: VPN problem

Post by ajliberty »

Thank you - I'll give it a shot in the am - cheers!!

ajliberty
Posts: 19
Joined: Sat Dec 31, 2016 3:01 am

Re: VPN problem

Post by ajliberty »

I've followed your instructions 1-3 above... as for #4, can I ask you to look at my port settings on the primary router?

I can't seem to get this to work...

https://photos.app.goo.gl/8JqPHxUUWkRoMhkA6

Post Reply