IPv6 local network only (no ipv4)

General discussion about Gargoyle, OpenWrt or anything else even remotely related to the project

Moderator: Moderators

Post Reply
scrmtrey
Posts: 102
Joined: Wed May 14, 2014 2:25 am

IPv6 local network only (no ipv4)

Post by scrmtrey »

Hi.

Is it possible to configure local network to operate at ipv6 only? Ipv4 should be disabled on local network (wifi, ethernet).


Between router and modem it still needs to be ipv4, cause ipv6 its not working.

I did not find any guide or options for that, maybe im missing something.

Thanks for replys.
wdr3600 v1.5 @ Latest ispyisail build

Lantis
Moderator
Posts: 6735
Joined: Mon Jan 05, 2015 5:33 am
Location: Australia

Re: IPv6 local network only (no ipv4)

Post by Lantis »

Gargoyle currently doesn't support IPv6 (at least not in the GUI).

You may be able to manually set some of it up by following guides for openwrt.
http://lantisproject.com/downloads/gargoyle_ispyisail.php for the latest releases
Please be respectful when posting. I do this in my free time on a volunteer basis.

scrmtrey
Posts: 102
Joined: Wed May 14, 2014 2:25 am

Re: IPv6 local network only (no ipv4)

Post by scrmtrey »

Ah ok. So it is possible with terminal.

This guide for openwrt is on openwrt forum?

Openwrt got GUI for local network ipv6 only setup?



Thanks.
wdr3600 v1.5 @ Latest ispyisail build

Lantis
Moderator
Posts: 6735
Joined: Mon Jan 05, 2015 5:33 am
Location: Australia

Re: IPv6 local network only (no ipv4)

Post by Lantis »

yes to all of those.
http://lantisproject.com/downloads/gargoyle_ispyisail.php for the latest releases
Please be respectful when posting. I do this in my free time on a volunteer basis.

scrmtrey
Posts: 102
Joined: Wed May 14, 2014 2:25 am

Re: IPv6 local network only (no ipv4)

Post by scrmtrey »

Ok. But i dont like openwrt qos. Gargoyle qos is super great. :D
wdr3600 v1.5 @ Latest ispyisail build

Post Reply