"Resetting...
U-Boot 1.1.4 (Mar 19 2014 - 11:06:29)
AP83 (ar9100) U-boot 0.0.11
DRAM:
sri
32 MB
id read 0x100000ff
flash size 8MB, sector count = 128
Flash: 8 MB
Using default environment
In: serial
Out: serial
Err: serial
Net: ag7100_enet_initialize...
No valid address in Flash. Using fixed address
: cfg1 0xf cfg2 0x7114
eth0: 00:03:7f:09:0b:ad
eth0 up
eth0
is_auto_upload_firmware=0
Autobooting in 1 seconds## Booting imagebootm at bf020000 ...
Uncompressing Kernel Image ... Error: Bad gzipped data
GUNZIP ERROR - must RESET board to recover."
TL-WR1043ND V1 bricked SOLVED !!!
Moderator: Moderators
-
- Posts: 43
- Joined: Mon Jan 27, 2014 5:28 pm
- Location: Bukarest
TL-WR1043ND V1 bricked SOLVED !!!
Last edited by vladtheodor on Mon Feb 09, 2015 7:33 pm, edited 1 time in total.
TP-Link TL-WR1043ND v1
-
- Posts: 43
- Joined: Mon Jan 27, 2014 5:28 pm
- Location: Bukarest
TL-WR1043ND V1 bricked
jtag
tpl (copy/paste)
erase(d) 0xbf020000 +7c0000
static IP changed to 192.168.0.5
uploaded with tftp2
cp.b help 0xbf020000 0x7c0000
bootm 0xbf020000
tryied images with/without bootloader
nothing helps, what can i do next ?
tpl (copy/paste)
erase(d) 0xbf020000 +7c0000
static IP changed to 192.168.0.5
uploaded with tftp2
cp.b help 0xbf020000 0x7c0000
bootm 0xbf020000
tryied images with/without bootloader
nothing helps, what can i do next ?
TP-Link TL-WR1043ND v1
-
- Posts: 43
- Joined: Mon Jan 27, 2014 5:28 pm
- Location: Bukarest
Re: TL-WR1043ND V1 bricked
I know that, thank you !!!
Topic moved here:
http://www.dd-wrt.com/phpBB2/viewtopic.php?t=278684
Still waiting for answers...
TP-Link TL-WR1043ND v1
-
- Posts: 43
- Joined: Mon Jan 27, 2014 5:28 pm
- Location: Bukarest
Re: TL-WR1043ND V1 bricked SOLVED !!!
vlad.theodor wrote:
Topic moved here:
http://www.dd-wrt.com/phpBB2/viewtopic.php?t=278684
Search for:
1) "wr1043nv1_tp_recovery.bin" ( http://www.dd-wrt.com/phpBB2/download.php?id=31148 )
2) Tftpd32 ( http://tftpd32.jounin.net/tftpd32_download.html )
3) Download archive from http://www.dd-wrt.com/phpBB2/download.php?id=29248
4) Use a UTP-cable ("no jtag"-style)
5) Read archive and PUT YOUR LAN CABLE IN THE LAN (yellow) PORT (NOT IN WAN)!!!
6) Change your computer ip in 192.168.0.66 and subnet mask in 255.255.255.0
7) Set Tftpd32 ready for upload
8) Router - power off, power on then quick pressed the 30/30/30-button till the "sevice-led" blinked fast
and Tftpd32 will autoupload your recovery-image then router will self-reboot like new.
Reset your computer IP to auto/dhcp and login in router at 192.168.1.1
Topic moved here:
http://www.dd-wrt.com/phpBB2/viewtopic.php?t=278684
Search for:
1) "wr1043nv1_tp_recovery.bin" ( http://www.dd-wrt.com/phpBB2/download.php?id=31148 )
2) Tftpd32 ( http://tftpd32.jounin.net/tftpd32_download.html )
3) Download archive from http://www.dd-wrt.com/phpBB2/download.php?id=29248
4) Use a UTP-cable ("no jtag"-style)
5) Read archive and PUT YOUR LAN CABLE IN THE LAN (yellow) PORT (NOT IN WAN)!!!
6) Change your computer ip in 192.168.0.66 and subnet mask in 255.255.255.0
7) Set Tftpd32 ready for upload
8) Router - power off, power on then quick pressed the 30/30/30-button till the "sevice-led" blinked fast
and Tftpd32 will autoupload your recovery-image then router will self-reboot like new.
Reset your computer IP to auto/dhcp and login in router at 192.168.1.1
TP-Link TL-WR1043ND v1