Firmware for WHR-HP-G54

General discussion about Gargoyle, OpenWrt or anything else even remotely related to the project

Moderator: Moderators

User avatar
chigo58
Posts: 41
Joined: Wed Dec 22, 2010 5:09 am

Firmware for WHR-HP-G54

Postby chigo58 » Wed Jan 07, 2015 5:52 pm

Eric, can you please guide me and recommend which stable firmware I should download for the good old Buffalo WHR-HPG54 BCM based router please?

would any of these do? or should i go with Backfire (10.03.1)

gargoyle_1.4.7-brcm47xx-squashfs.trx
gargoyle_1.6.2-brcm47xx-squashfs.trx
gargoyle_1.7.0-brcm47xx-generic-squashfs.trx

Thank you
x2 Archer C5,C7 - Stock | x1 TL-WA730RE v1 - Openwrt 14.07 | x2 TL-WR1043ND v1.7 - Gargoyle v1.6.X http://goo.gl/VMbxcH | x2 WRT54GL v1.1 Tomato v1.28.7821 MIPSR1-Toastman-ND, 14929_vpn | x1 WHR-HP-G54 - Gargoyle 1.4.7

User avatar
DoesItMatter
Moderator
Posts: 1373
Joined: Thu May 21, 2009 3:56 pm

Re: Firmware for WHR-HP-G54

Postby DoesItMatter » Thu Jan 08, 2015 2:28 am

http://wiki.openwrt.org/toh/buffalo/whr-hp-g54

See that post

1.4.7 would be your best bet

If you want to try - you could also try 1.5.6

1.5.7 and up uses attitude adjustment which causes
memory issues with 4mb flash/16mb ram devices
:twisted: Soylent Green Is People! :twisted:
2x Asus RT-N16 = Asus 3.0.0.4.374.43 Merlin
2x Buffalo WZR-HP-G300NH V1 A0D0 = Gargoyle 1.9.x / LEDE 17.01.x
2x Engenius - ESR900 Stock 1.4.0 / OpenWRT Trunk 49400

User avatar
chigo58
Posts: 41
Joined: Wed Dec 22, 2010 5:09 am

Re: Firmware for WHR-HP-G54

Postby chigo58 » Thu Jan 08, 2015 2:41 am

Than you.
x2 Archer C5,C7 - Stock | x1 TL-WA730RE v1 - Openwrt 14.07 | x2 TL-WR1043ND v1.7 - Gargoyle v1.6.X http://goo.gl/VMbxcH | x2 WRT54GL v1.1 Tomato v1.28.7821 MIPSR1-Toastman-ND, 14929_vpn | x1 WHR-HP-G54 - Gargoyle 1.4.7

User avatar
sqlgeek
Posts: 1
Joined: Wed Feb 11, 2015 1:02 pm

Re: Firmware for WHR-HP-G54

Postby sqlgeek » Wed Feb 11, 2015 1:11 pm

chigo58 wrote:Eric, can you please guide me and recommend which stable firmware I should download for the good old Buffalo WHR-HPG54 BCM based router please?

would any of these do? or should i go with Backfire (10.03.1)

gargoyle_1.4.7-brcm47xx-squashfs.trx
gargoyle_1.6.2-brcm47xx-squashfs.trx
gargoyle_1.7.0-brcm47xx-generic-squashfs.trx

Thank you


I am considering doing the same for my WHR-HP-G54 and was wondering which firmware you chose and if you had any problems or tips.

User avatar
chigo58
Posts: 41
Joined: Wed Dec 22, 2010 5:09 am

Re: Firmware for WHR-HP-G54

Postby chigo58 » Wed Feb 11, 2015 4:32 pm

I migrated directly from tomato 1.28 to this firmware

Code: Select all

gargoyle_1.4.7-brcm47xx-squashfs.trx
and have no regrets so far. Stable and works like a champ :)
x2 Archer C5,C7 - Stock | x1 TL-WA730RE v1 - Openwrt 14.07 | x2 TL-WR1043ND v1.7 - Gargoyle v1.6.X http://goo.gl/VMbxcH | x2 WRT54GL v1.1 Tomato v1.28.7821 MIPSR1-Toastman-ND, 14929_vpn | x1 WHR-HP-G54 - Gargoyle 1.4.7


Return to “General Discussion”

Who is online

Users browsing this forum: No registered users and 2 guests