Was wondering would I be able to go back to dd-wrt/Stock if I did not like Gargoyle? on the Rosewill RNX-300RT? Its a Rebranded TP-link WR841N V7. I know how to get it installed, I just don`t know If I will be able to go back :/ I know how to get back from DD-WRT back to stock, But reason being is if something did not work right or QoS did not work for me, Last time I tried Gargoyle a few months ago on a higher end router QoS did not work for me for uploading, While Uploading I would still get a HIGH ping.
But Thank you!
Rosewill 300RT Would I be able to go back Stock
Moderator: Moderators
- DoesItMatter
- Moderator
- Posts: 1373
- Joined: Thu May 21, 2009 3:56 pm
Re: Rosewill 300RT Would I be able to go back Stock
You should be able to flash back and forth from Gargoyle to DD-WRT
Make sure you are able to serial recover if it's that critical to you
There's always a chance for a bad flash and you might have to
serial recover a router.
Make sure you are able to serial recover if it's that critical to you
There's always a chance for a bad flash and you might have to
serial recover a router.
Soylent Green Is People!
2x Asus RT-N16 = Asus 3.0.0.4.374.43 Merlin
2x Buffalo WZR-HP-G300NH V1 A0D0 = Gargoyle 1.9.x / LEDE 17.01.x
2x Engenius - ESR900 Stock 1.4.0 / OpenWRT Trunk 49400
2x Asus RT-N16 = Asus 3.0.0.4.374.43 Merlin
2x Buffalo WZR-HP-G300NH V1 A0D0 = Gargoyle 1.9.x / LEDE 17.01.x
2x Engenius - ESR900 Stock 1.4.0 / OpenWRT Trunk 49400