Is it ok to flash WR941 V3.8 with this firmware

General discussion about Gargoyle, OpenWrt or anything else even remotely related to the project

Moderator: Moderators

Post Reply
roman9441
Posts: 26
Joined: Wed May 21, 2014 10:06 pm

Is it ok to flash WR941 V3.8 with this firmware

Post by roman9441 »

Is it ok to flash WR941 V3.8 with this firmware. Currently i'm running DD-wrt but i facing a lot of problem of wireless drop and my friend complain about it so i found this firmware. But i'm research and i'm found someone say with v3.8 of router this firmware will brick it

Is it true ? . Because i have no idea about how to recover if it broekn

Thank you all answer :) in advance

User avatar
DoesItMatter
Moderator
Posts: 1373
Joined: Thu May 21, 2009 3:56 pm

Re: Is it ok to flash WR941 V3.8 with this firmware

Post by DoesItMatter »

See this page

http://wiki.openwrt.org/toh/tp-link/tl-wr941nd

Should be fine to flash Gargoyle 1.6.0 or 1.6.1

DO NOT FLASH ANYTHING BELOW 1.5.7 on your WR941 V3.8

You need Attitude Adjustment branch for your V3.8

Versions you could try:

1.5.10
1.5.11
1.6.0
1.6.1
:twisted: Soylent Green Is People! :twisted:
2x Asus RT-N16 = Asus 3.0.0.4.374.43 Merlin
2x Buffalo WZR-HP-G300NH V1 A0D0 = Gargoyle 1.9.x / LEDE 17.01.x
2x Engenius - ESR900 Stock 1.4.0 / OpenWRT Trunk 49400

roman9441
Posts: 26
Joined: Wed May 21, 2014 10:06 pm

Re: Is it ok to flash WR941 V3.8 with this firmware

Post by roman9441 »

Thank you for answer my question. I'm try my own risk since yesterday but anyway Thank you for your answer

This firmware solve all problem i have with DD-wrt Thank you sir. I use 1.6.1 work great still no wireless drop or pick spark like dd-wrt awesome firmware and thx for awesome support

Post Reply