[TIP] TP-Link - Back to original firmware - simple steps.

General discussion about Gargoyle, OpenWrt or anything else even remotely related to the project

Moderator: Moderators

Lantis
Moderator
Posts: 6735
Joined: Mon Jan 05, 2015 5:33 am
Location: Australia

Re: [TIP] TP-Link - Back to original firmware - simple steps

Post by Lantis »

Failsafe reset the router.
There's a thread called "Gargoyle CLI" or something. It has a YouTube video on how to do it.
http://lantisproject.com/downloads/gargoyle_ispyisail.php for the latest releases
Please be respectful when posting. I do this in my free time on a volunteer basis.

Random_penta
Posts: 4
Joined: Tue Jul 05, 2016 6:21 pm

Re: [TIP] TP-Link - Back to original firmware - simple steps

Post by Random_penta »

I tried to enter in the "failsafe mode" following these instructions

https://wiki.openwrt.org/toh/tp-link/tl-mr3420

"Enter failsafe mode:
1. remove the power plug from the router
2. press and hold the RESET button
3. insert the power plug
4. release the RESET button
"

or other methods, as

"Press and hold WDS/RESET, power on, the WDS-LED (padlock) lights up. "

but nobody works for me. The led-padlock lights up for 7-8 seconds, the pc seems to find something as a wired connection... and after that 7-8 seconds, the router returns to lights first the on/off led and 3 seconds later all the leds. After 2 seconds only the on/off led, and 3 seconds later all the leds... and so on... and my pc doesn't find anything anymore...

Suggestions?

Lantis
Moderator
Posts: 6735
Joined: Mon Jan 05, 2015 5:33 am
Location: Australia

Re: [TIP] TP-Link - Back to original firmware - simple steps

Post by Lantis »

http://lantisproject.com/downloads/gargoyle_ispyisail.php for the latest releases
Please be respectful when posting. I do this in my free time on a volunteer basis.

Random_penta
Posts: 4
Joined: Tue Jul 05, 2016 6:21 pm

Re: [TIP] TP-Link - Back to original firmware - simple steps

Post by Random_penta »

Yeah, but my power led never blinks so fastly!
I tried with the wps/reset button and also with the widi button, but nothing work.... only with the wps button the padlock led turn on for 7-8 seconds, but after returns as Always...

ispyisail
Moderator
Posts: 5180
Joined: Mon Apr 06, 2009 3:15 am
Location: New Zealand

Re: [TIP] TP-Link - Back to original firmware - simple steps

Post by ispyisail »

serial cable

melquiferreira
Posts: 18
Joined: Sat Oct 05, 2013 7:14 am

Re: [TIP] TP-Link - Back to original firmware - simple steps

Post by melquiferreira »

danymarc wrote:in this topic I posted this link ftp://tplink-forum.pl/orgin_bez_boot/ and this one too http://www.friedzombie.com/tplink-stripped-firmware/ you have lots of Tp-Link stripped firmware, all you need is to download your version and through gargoyle interface upload it
Thanks for this tip!

Post Reply