Help on ASUS WL-520GU

General discussion about Gargoyle, OpenWrt or anything else even remotely related to the project

Moderator: Moderators

Post Reply
Berenjeno
Posts: 1
Joined: Tue Mar 20, 2012 11:00 am

Help on ASUS WL-520GU

Post by Berenjeno »

I have a ASUS WL-520GU, I want to flash it with Gargolye 1.2.4 to use it with Maxmel 8515 or AVR on IKS...But if I can use other Gargolye can tell me.

on the guide indicate that I have to flash it first with kamikaze8.09.2-openwrt-brcm-2.4-squashfs.trx and then I flash it with gargoyle_1.2.4-brcm-2.4-squashfs.trx, fine but some one told me that I have to add other bin to run the RQ in the Router,.. that is true ?
if yes where I can find it ?
Thanks !!

doritos
Posts: 45
Joined: Mon May 02, 2011 2:02 pm

Re: Help on ASUS WL-520GU

Post by doritos »

I really can't understand why people want to share their illegal stuff across the internet.

Tip to moderators: Any activity related to IKS (TV Card Sharing over internet) should be deleted, otherwise this stuff may attract unwanted audience to this forum

User avatar
DoesItMatter
Moderator
Posts: 1373
Joined: Thu May 21, 2009 3:56 pm

Re: Help on ASUS WL-520GU

Post by DoesItMatter »

See this page: http://wiki.openwrt.org/toh/asus/wl520gu

Looks like its not supported officially by OpenWRT (Trunk only)

So, no support from Gargoyle currently.

Do not flash any Gargoyle images to your WL520GU unless you
have tools to un-brick your router.
:twisted: Soylent Green Is People! :twisted:
2x Asus RT-N16 = Asus 3.0.0.4.374.43 Merlin
2x Buffalo WZR-HP-G300NH V1 A0D0 = Gargoyle 1.9.x / LEDE 17.01.x
2x Engenius - ESR900 Stock 1.4.0 / OpenWRT Trunk 49400

Post Reply