Gargoyle on Glinet MT300N-V2

General discussion about Gargoyle, OpenWrt or anything else even remotely related to the project

Moderator: Moderators

Post Reply
oyeyemi
Posts: 5
Joined: Tue Aug 06, 2019 9:56 am

Gargoyle on Glinet MT300N-V2

Post by oyeyemi »

Hello,
Please I bought MT300N-V2 router thinking I would be
able to flash Gargoyle on it. I contacted the manufacturer
for help. And I was directed to flash this
gargoyle_1.11.0-ramips-mt7620-gl-mt300n-squashfs-sysupgrade.bin

After flashing the above firmware the router didn't reboot automatically,
so I believed the firmware didn't work.

Please, is there any other firmware I can flash on this router.

Thanks.

Lantis
Moderator
Posts: 6735
Joined: Mon Jan 05, 2015 5:33 am
Location: Australia

Re: Gargoyle on Glinet MT300N-V2

Post by Lantis »

They gave you bad advice. The V1 and V2 are different with different processors and other hardware.

We don't build images for the V2, only V1.
It would probably be possible for you to custom build one for your router.
http://lantisproject.com/downloads/gargoyle_ispyisail.php for the latest releases
Please be respectful when posting. I do this in my free time on a volunteer basis.

oyeyemi
Posts: 5
Joined: Tue Aug 06, 2019 9:56 am

Re: Gargoyle on Glinet MT300N-V2

Post by oyeyemi »

Lantis wrote:They gave you bad advice. The V1 and V2 are different with different processors and other hardware.

We don't build images for the V2, only V1.
It would probably be possible for you to custom build one for your router.
Thank you for your reply Mr Lantis.
Please sir, can you kindly give me a clue or advice of how to go
about the customisation to build an image for Glinet MT300N-V2.

Thanks.

ispyisail
Moderator
Posts: 5180
Joined: Mon Apr 06, 2009 3:15 am
Location: New Zealand

Re: Gargoyle on Glinet MT300N-V2

Post by ispyisail »


oyeyemi
Posts: 5
Joined: Tue Aug 06, 2019 9:56 am

Re: Gargoyle on Glinet MT300N-V2

Post by oyeyemi »

Woah!
Thank you so much Mr ispyisail for the excellent work.
But can you give me the "unique" procedure to follow in my own case concerning Glinet MT300N-V2.
I am so grateful.

Thanks

Volaris
Posts: 177
Joined: Thu May 01, 2014 1:02 pm

Re: Gargoyle on Glinet MT300N-V2

Post by Volaris »

oyeyemi wrote:Hello,
Please I bought MT300N-V2 router thinking I would be
able to flash Gargoyle on it. I contacted the manufacturer
for help. And I was directed to flash this
gargoyle_1.11.0-ramips-mt7620-gl-mt300n-squashfs-sysupgrade.bin

After flashing the above firmware the router didn't reboot automatically,
so I believed the firmware didn't work.

Please, is there any other firmware I can flash on this router.

Thanks.
Gargoyle PL by obsy has a Gargoyle firmware for the MT300N-V2. Works fine on mine.

You can download from here:
https://dl.eko.one.pl/gargoyle-pl/openw ... ps/mt76x8/
QoS Tip: Don't complicate your QoS settings. Gargoyle evenly splits available bandwidth between active devices as needed. Just delete all your classification rules and leave only one normal service class and you're done. No more arguing over bandwidth.

Post Reply