Hello,
I am searching for a way to get QoS(for gaming) working on a variable Bandwith and somone from another forum linked me to this firmware. So my question is if thats possible to do.
Thanks in advance.
QoS on variable Bandwith
Moderator: Moderators
Re: QoS on variable Bandwith
Yes, it has these qualities. I do not use it and therefore I will refer you to the documentation: https://www.gargoyle-router.com/wiki/doku.php?id=qos
If you would like more information, someone else will advise you here.
If you would like more information, someone else will advise you here.
Turris Omnia with OpenWrt 21.02 - Tested
Linksys WRT3200ACM with Gargoyle 1.13.x
TL-WR1043ND v2 with Gargoyle 1.10.0
http://gargoyle.romanhk.cz custom builds by gargoyle users
Linksys WRT3200ACM with Gargoyle 1.13.x
TL-WR1043ND v2 with Gargoyle 1.10.0
http://gargoyle.romanhk.cz custom builds by gargoyle users
Re: QoS on variable Bandwith
how variable?variable Bandwith
-
dominik1411
- Posts: 2
- Joined: Fri Apr 26, 2019 9:04 am
Re: QoS on variable Bandwith
Between 60 and 35 MBit.ispyisail wrote:how variable?variable Bandwith
Re: QoS on variable Bandwith
The active congestion controller can manipulate your bandwidth down to 15% of total.
60 * 0.15 = 9Mbps
So ACC should definitely be able to handle your range.
This isn’t strictly what ACC was designed to do, but it should do ok.
In the past we have also had users write scheduled tasks to reset their speeds because they had known times when speeds would rise or fall.
60 * 0.15 = 9Mbps
So ACC should definitely be able to handle your range.
This isn’t strictly what ACC was designed to do, but it should do ok.
In the past we have also had users write scheduled tasks to reset their speeds because they had known times when speeds would rise or fall.
http://lantisproject.com/downloads/gargoyle_ispyisail.php for the latest releases
Please be respectful when posting. I do this in my free time on a volunteer basis.
Please be respectful when posting. I do this in my free time on a volunteer basis.