wrt1900ACS (ACS v.2)

General discussion about Gargoyle, OpenWrt or anything else even remotely related to the project

Moderator: Moderators

User avatar
oliver44
Posts: 71
Joined: Tue Mar 20, 2018 1:29 am
Location: Romanaia

Re: wrt1900ACS (AC v.2)

Post by oliver44 »

Can you give me a link to a website where i could buy the cable serial port, that i can connect to the router?
Maybe you have done this and you know the cable that can help me...

Thanks for patience and information, i will try to solve this problem.
wdr3600 rev1.4 OpenWrt
wrt1900ACS v.2 OpenWrt/DD-WRT
GL-MT6000 OpenWrt/Gargoyle

User avatar
oliver44
Posts: 71
Joined: Tue Mar 20, 2018 1:29 am
Location: Romanaia

Re: wrt1900ACS (AC v.2)

Post by oliver44 »

It seems like now i have access to the router with WinScp and Putty, this after i gave a reset to defaults from GUI on OpenWrt.
How can i find if partitions are okay, what you recommend now if i have access with Putty?

http://s.go.ro/i3uzrhsc
wdr3600 rev1.4 OpenWrt
wrt1900ACS v.2 OpenWrt/DD-WRT
GL-MT6000 OpenWrt/Gargoyle

Rog66
Posts: 206
Joined: Fri Jan 04, 2013 4:53 pm

Re: wrt1900ACS (AC v.2)

Post by Rog66 »

in the GUI go to System-> Advanced Reboot -> Reboot to Alternative Partition

When the router reboots check what firmware is there - if its openwrt go back to the advanced reboot screen and see if the active partition is different to the first time you were there - if not the firmware on the alternative partition is no good. If its another firmware then the firmware on that partition is probably ok if the router booted into it.

Check the openwrt wiki for how to reflash various firmware's from openwrt.

User avatar
oliver44
Posts: 71
Joined: Tue Mar 20, 2018 1:29 am
Location: Romanaia

Re: wrt1900ACS (AC v.2)

Post by oliver44 »

It looks like everything is okay, the second partition I have the original linksys firmware, everything runs smoothly and very quickly the switch from one partition to another!

http://s.go.ro/i3uzrhsc
wdr3600 rev1.4 OpenWrt
wrt1900ACS v.2 OpenWrt/DD-WRT
GL-MT6000 OpenWrt/Gargoyle

User avatar
oliver44
Posts: 71
Joined: Tue Mar 20, 2018 1:29 am
Location: Romanaia

Re: wrt1900ACS (AC v.2)

Post by oliver44 »

@Lantis How can i see if the partitions are okay, or everything is working fine?
As you can see above, now i have access to Putty and WinScp.
wdr3600 rev1.4 OpenWrt
wrt1900ACS v.2 OpenWrt/DD-WRT
GL-MT6000 OpenWrt/Gargoyle

Lantis
Moderator
Posts: 6735
Joined: Mon Jan 05, 2015 5:33 am
Location: Australia

Re: wrt1900ACS (AC v.2)

Post by Lantis »

You can’t do much except for booting into each one to see if it works.
You can also dump the MTDs for each partition and examine the contents. Both of these methods require a bit of knowledge and understanding what you’re doing.

If it’s working, I’d leave it alone :)
http://lantisproject.com/downloads/gargoyle_ispyisail.php for the latest releases
Please be respectful when posting. I do this in my free time on a volunteer basis.

User avatar
oliver44
Posts: 71
Joined: Tue Mar 20, 2018 1:29 am
Location: Romanaia

Re: wrt1900ACS (AC v.2)

Post by oliver44 »

[link removed]
Last edited by oliver44 on Mon Oct 22, 2018 11:46 pm, edited 1 time in total.
wdr3600 rev1.4 OpenWrt
wrt1900ACS v.2 OpenWrt/DD-WRT
GL-MT6000 OpenWrt/Gargoyle

Lantis
Moderator
Posts: 6735
Joined: Mon Jan 05, 2015 5:33 am
Location: Australia

Re: wrt1900ACS (AC v.2)

Post by Lantis »

We can’t assist you with that here sorry
http://lantisproject.com/downloads/gargoyle_ispyisail.php for the latest releases
Please be respectful when posting. I do this in my free time on a volunteer basis.

User avatar
oliver44
Posts: 71
Joined: Tue Mar 20, 2018 1:29 am
Location: Romanaia

Re: wrt1900ACS (AC v.2)

Post by oliver44 »

@Lantis, i understand i did not want to bring any offense to this forum, i just wanted to show that wrt1900acs v2 is moving very well on OpenWrt!
I hope that Gargoyle will soon have the same performance as OpenWrt and support IPV6, congratulations for everything you do here.
wdr3600 rev1.4 OpenWrt
wrt1900ACS v.2 OpenWrt/DD-WRT
GL-MT6000 OpenWrt/Gargoyle

ispyisail
Moderator
Posts: 5180
Joined: Mon Apr 06, 2009 3:15 am
Location: New Zealand

Re: wrt1900ACS (AC v.2)

Post by ispyisail »

I hope that Gargoyle will soon have the same performance as OpenWrt and support IPV6
I doubt its going to happen any time soon.........

Who knows the future

Post Reply