Page 1 of 1

Upnp not function in Xbox one + Gargoyle?

Posted: Thu Jan 04, 2018 7:03 pm
by oneonvanhalen
Hi, my xbox can not use the feature upnp!
Always appears "nonfunctional upnp!"

firmware: 1.1.10
Router: TP-Link TL-WDR4300 v1
UPnP able on!

Is this a bug?

Re: Upnp not function in Xbox one + Gargoyle?

Posted: Thu Jan 04, 2018 8:09 pm
by Lantis
Which Xbox?
It is probably related to an incompatibility that Microsoft introduced with newer UPNP versions.

There won’t be a fix available until we move to LEDE building or you compile your own legacy support.

If UPnP works for other devices, this is most likely.
For now, you should use firewall and port forwarding rules to fix this.

Re: Upnp not function in Xbox one + Gargoyle?

Posted: Tue Dec 04, 2018 1:31 pm
by imbaSD
Lantis wrote:Which Xbox?
It is probably related to an incompatibility that Microsoft introduced with newer UPNP versions.

There won’t be a fix available until we move to LEDE building or you compile your own legacy support.

If UPnP works for other devices, this is most likely.
For now, you should use firewall and port forwarding rules to fix this.
I am experiencing the same problem with my XBOX ONE X
If i put DMZ my XBOX then everything is ok
If i Port Forword the PORTS one by one and Enable UPnP & NAT-PMP service then my NAT at XBOX appear as MODERATE and UPnP N/A

Gargoyle router is connected to ISP Modem/Router via PPPoE (Wired) and at ISP's Modem/Router i try everything (port forward to Gargoyle / DMZ Gargoyle etc.) but still unable through Gargoyle to achieve OPEN NAT.
Port Forwarding i assume i done correct https://screenshotscdn.firefoxuserconte ... f61793.png

If i connect XBOX direct to ISP's Modem/Router and Port Forward one by one ports and enable UPnP then at XBOX appear to be OK (NAT OPEN)

I assume that in my occasion i am experiencing incompatibility too. Could you tell me how i should use firewall and port forwarding rules to fix this?

Re: Upnp not function in Xbox one + Gargoyle?

Posted: Wed Dec 05, 2018 6:33 am
by Lantis
Your port forwarding looks fine.

Re: Upnp not function in Xbox one + Gargoyle?

Posted: Wed Dec 05, 2018 8:42 am
by imbaSD
Lantis wrote:Your port forwarding looks fine.
Yes but without DMZ i dont get NAT OPEN (at best MODERATE) and the UPnP shown N/A

So i came up to DMZ my XBOX

Re: Upnp not function in Xbox one + Gargoyle?

Posted: Wed Dec 05, 2018 8:57 am
by Lantis
You can DMZ but I wouldn’t recommend doing so to a non firewalled device.

You’re either missing ports or something else. If your modem is purely in bridge mode there is no need to DMZ there either.

You could try the newer 1.11.x betas to see if the problem goes away.
Other than that I don’t have a solution for you.

Re: Upnp not function in Xbox one + Gargoyle?

Posted: Wed Dec 05, 2018 12:00 pm
by Sgt-Greco
imbaSD wrote:
Lantis wrote:Your port forwarding looks fine.
Yes but without DMZ i dont get NAT OPEN (at best MODERATE) and the UPnP shown N/A

So i came up to DMZ my XBOX
I think you are missing 3075 UDP

Re: Upnp not function in Xbox one + Gargoyle?

Posted: Thu Dec 06, 2018 5:00 am
by imbaSD
Lantis wrote:You can DMZ but I wouldn’t recommend doing so to a non firewalled device.

You’re either missing ports or something else. If your modem is purely in bridge mode there is no need to DMZ there either.

You could try the newer 1.11.x betas to see if the problem goes away.
Other than that I don’t have a solution for you.
Yes i know, i just DMZ my device to see if problem solving and it is not something else.
Will contineu trying
Ty btw

Sgt-Greco wrote:
imbaSD wrote:
Lantis wrote:Your port forwarding looks fine.
Yes but without DMZ i dont get NAT OPEN (at best MODERATE) and the UPnP shown N/A

So i came up to DMZ my XBOX
I think you are missing 3075 UDP
As per this page https://support.xbox.com/en-US/xbox-one ... -xbox-live 3075 is not listing

Re: Upnp not function in Xbox one + Gargoyle?

Posted: Mon Dec 10, 2018 1:49 pm
by imbaSD
Solution founded

https://www.reddit.com/r/xboxone/commen ... box_one_x/

Just needed more Ports to open