rt-n13u b1

General discussion about Gargoyle, OpenWrt or anything else even remotely related to the project

Moderator: Moderators

tybalt81
Posts: 5
Joined: Fri Nov 10, 2017 5:39 pm

rt-n13u b1

Postby tybalt81 » Fri Nov 10, 2017 5:43 pm

Re: Router Firmware Requests
Postby dlogictech » Tue Jan 05, 2016 10:46 pm

Router Model: Asus RT-N13U H/W Rev. B1
Link to Openwrt wiki: https://wiki.***.org/toh/asus/rt-n13u
Is it supported in Openwrt? Yes
Does it have >= 4MB of flash? Yes
Does it have >= 8MB of flash? Yes
Does it have USB support? Yes


Notes from Lantis:
Accepted


I see this was accepted but don't see a specific build for this at all. Can someone please let me know which firmware to download for this specific unit.

Lantis
Moderator
Posts: 3601
Joined: Mon Jan 05, 2015 5:33 am
Location: Australia

Re: rt-n13u b1

Postby Lantis » Fri Nov 10, 2017 7:42 pm

That only means that I did a one off custom build.
It is now severely out of date.
WRT1900AC V1 on 1.10.X
WNDR3800/WRT3200ACM in a constant state of flux
www.lantisproject.com for custom builds and other projects
www.lantisproject.com/gargoyle_ispyisail/ for the latest releases

tybalt81
Posts: 5
Joined: Fri Nov 10, 2017 5:39 pm

Re: rt-n13u b1

Postby tybalt81 » Fri Dec 01, 2017 11:00 am

Trying to compile firmware for this device. Failed with the attached error. Anyone have any advice how to remedy this

Code: Select all

/home/knoppix/Downloads/gargoyle/custom-src/build_dir/host/u-boot-2014.10/lib/rsa/rsa-sign.c: In function 'rsa_get_exponent':
/home/knoppix/Downloads/gargoyle/custom-src/build_dir/host/u-boot-2014.10/lib/rsa/rsa-sign.c:279:21: error: dereferencing pointer to incomplete type 'RSA {aka struct rsa_st}'
  if (BN_num_bits(key->e) > 64)
                     ^~
scripts/Makefile.host:134: recipe for target 'tools/lib/rsa/rsa-sign.o' failed
make[6]: *** [tools/lib/rsa/rsa-sign.o] Error 1
Makefile:1195: recipe for target 'tools-only' failed
make[5]: *** [tools-only] Error 2
make[5]: Leaving directory '/home/knoppix/Downloads/gargoyle/custom-src/build_dir/host/u-boot-2014.10'
Makefile:46: recipe for target '/home/knoppix/Downloads/gargoyle/custom-src/build_dir/host/u-boot-2014.10/.built' failed
make[4]: *** [/home/knoppix/Downloads/gargoyle/custom-src/build_dir/host/u-boot-2014.10/.built] Error 2
make[4]: Leaving directory '/home/knoppix/Downloads/gargoyle/custom-src/tools/mkimage'
tools/Makefile:122: recipe for target 'tools/mkimage/compile' failed
make[3]: *** [tools/mkimage/compile] Error 2
make[3]: Leaving directory '/home/knoppix/Downloads/gargoyle/custom-src'
tools/Makefile:121: recipe for target '/home/knoppix/Downloads/gargoyle/custom-src/staging_dir/target-mips_34kc_uClibc-0.9.33.2/stamp/.tools_install_yynyynynynyyyyyyyyynyyyyyyyyynyyyyynnyyynnyynnnyy' failed
make[2]: *** [/home/knoppix/Downloads/gargoyle/custom-src/staging_dir/target-mips_34kc_uClibc-0.9.33.2/stamp/.tools_install_yynyynynynyyyyyyyyynyyyyyyyyynyyyyynnyyynnyynnnyy] Error 2
make[2]: Leaving directory '/home/knoppix/Downloads/gargoyle/custom-src'
/home/knoppix/Downloads/gargoyle/custom-src/include/toplevelmk:181: recipe for target 'world' failed
make[1]: *** [world] Error 2
make[1]: Leaving directory '/home/knoppix/Downloads/gargoyle/custom-src'
find: ‘bin’: No such file or directory
find: ‘’: No such file or directory
find: ‘’: No such file or directory
ls: cannot access 'bin': No such file or directory

ispyisail
Moderator
Posts: 3675
Joined: Mon Apr 06, 2009 3:15 am
Location: New Zealand

Re: rt-n13u b1

Postby ispyisail » Fri Dec 01, 2017 7:26 pm

Start by doing a default build first

If that works well then do a custom build

This will determine if the problem is the build environment or your custom settings.

tybalt81
Posts: 5
Joined: Fri Nov 10, 2017 5:39 pm

Re: rt-n13u b1

Postby tybalt81 » Sat Dec 02, 2017 1:00 pm

Still getting some grief trying to compile. Did

make clean
make cleanup
make distclean

make custom

TARGET SYSTEM => Ralink RT288x/RT3xxx
SUB TARGET => RT3x5x/RT5350
TARGET PROFILE => Asus RT-N13U

Left all other options alone. This is error I get back

Code: Select all

ERROR: module '/home/knoppix/Downloads/gargoyle/custom-src/build_dir/target-mips_34kc_uClibc-0.9.33.2/linux-ar71xx/linux-3.18.75/net/ipv4/netfilter/*weburl*.ko' is missing.
modules/netfilter.mk:887: recipe for target '/home/knoppix/Downloads/gargoyle/custom-src/bin/ar71xx/packages/base/kmod-ipt-weburl_3.18.75-1-ca1d855253c78db4a5bb6e504e172ede_ar71xx.ipk' failed
make[4]: *** [/home/knoppix/Downloads/gargoyle/custom-src/bin/ar71xx/packages/base/kmod-ipt-weburl_3.18.75-1-ca1d855253c78db4a5bb6e504e172ede_ar71xx.ipk] Error 1
make[4]: Leaving directory '/home/knoppix/Downloads/gargoyle/custom-src/package/kernel/linux'
package/Makefile:193: recipe for target 'package/kernel/linux/compile' failed
make[3]: *** [package/kernel/linux/compile] Error 2
make[3]: Leaving directory '/home/knoppix/Downloads/gargoyle/custom-src'
package/Makefile:190: recipe for target '/home/knoppix/Downloads/gargoyle/custom-src/staging_dir/target-mips_34kc_uClibc-0.9.33.2/stamp/.package_compile' failed
make[2]: *** [/home/knoppix/Downloads/gargoyle/custom-src/staging_dir/target-mips_34kc_uClibc-0.9.33.2/stamp/.package_compile] Error 2
make[2]: Leaving directory '/home/knoppix/Downloads/gargoyle/custom-src'
/home/knoppix/Downloads/gargoyle/custom-src/include/toplevel.mk:181: recipe for target 'world' failed
make[1]: *** [world] Error 2
make[1]: Leaving directory '/home/knoppix/Downloads/gargoyle/custom-src'
cp: cannot stat 'bin/ar71xx/uboot-ar71xx-nbg460n_550n_550nh:': No such file or directory

Lantis
Moderator
Posts: 3601
Joined: Mon Jan 05, 2015 5:33 am
Location: Australia

Re: rt-n13u b1

Postby Lantis » Sat Dec 02, 2017 4:57 pm

That’s a pretty standard error when doing custom builds. Means the config is borked.

For your own sanity, please try as ispyisail suggests.
Just build a regular ar71xx target and see if it completes.
Then I will give you my method of doing custom builds
WRT1900AC V1 on 1.10.X
WNDR3800/WRT3200ACM in a constant state of flux
www.lantisproject.com for custom builds and other projects
www.lantisproject.com/gargoyle_ispyisail/ for the latest releases

tybalt81
Posts: 5
Joined: Fri Nov 10, 2017 5:39 pm

Re: rt-n13u b1

Postby tybalt81 » Sun Dec 03, 2017 10:17 am

Well I was able to get a few different default builds to successfully complete I’m going to assume you were going to suggest copying that config file and running make custom to open it up and make changes to TARGET etc

Lantis
Moderator
Posts: 3601
Joined: Mon Jan 05, 2015 5:33 am
Location: Australia

Re: rt-n13u b1

Postby Lantis » Sun Dec 03, 2017 3:37 pm

Sort of.

Make custom and configure your build.
Save the config when prompted to do so.
Immediately kill the build and enter the custom-src directory.
Copy the .config file to a new target and make that


Also be sure you are selecting the minimum Gargoyle packages in the make custom menu
WRT1900AC V1 on 1.10.X
WNDR3800/WRT3200ACM in a constant state of flux
www.lantisproject.com for custom builds and other projects
www.lantisproject.com/gargoyle_ispyisail/ for the latest releases

tybalt81
Posts: 5
Joined: Fri Nov 10, 2017 5:39 pm

Re: rt-n13u b1

Postby tybalt81 » Mon Dec 04, 2017 5:40 pm

Successful build and flash still need to test though Thank you so much gentleman. Followed your instructions had a few hiccups but reached the end goal. I appreciate all the help. This was my first custom build and will not be the last. Glad I took the time to figure this out. Was not nearly as bad as I thought it was going to be. Now if I could only get gargoyle going on my DIR-862l. Which is only supported currently by dd-wrt but is very similar to Archer C7 v2

Lantis
Moderator
Posts: 3601
Joined: Mon Jan 05, 2015 5:33 am
Location: Australia

Re: rt-n13u b1

Postby Lantis » Mon Dec 04, 2017 7:34 pm

I’m glad you got a successful build done :)

Any further questions let us know we can hopefully guide you in the right direction
WRT1900AC V1 on 1.10.X
WNDR3800/WRT3200ACM in a constant state of flux
www.lantisproject.com for custom builds and other projects
www.lantisproject.com/gargoyle_ispyisail/ for the latest releases


Return to “General Discussion”

Who is online

Users browsing this forum: Bing [Bot] and 4 guests