Version 1.9.1

The latest news about Gargoyle

Moderator: Moderators

Lantis
Moderator
Posts: 6735
Joined: Mon Jan 05, 2015 5:33 am
Location: Australia

Re: Version 1.9.1

Post by Lantis »

deepblue2000 wrote:I have upgraded today successfully from 1.8.1 (wa901nd) to 1.9.1

in Basic Settings the "Transmit Power:" is now max 24
in 1.8.1 I could set 30 (max)

is there a patch to get 30 Transmit power back ?
If your country's regulatory standards do not allow you to transmit at 30dBm then no.
http://lantisproject.com/downloads/gargoyle_ispyisail.php for the latest releases
Please be respectful when posting. I do this in my free time on a volunteer basis.

racy
Posts: 4
Joined: Mon Jun 22, 2015 4:06 pm

Re: Version 1.9.1

Post by racy »

Hi,

My router is a tplink 1043nd v1 ... I was using 1.9.0 and I upgraded to 1.9.1 ... I didn´t save the settings and my router is "dead" now .... failsafe doesn´t work because the SYS led is off ... TFTP upload didn´t work also .... so be careful ....

Best Regards

RACY

Naevus
Posts: 11
Joined: Tue Aug 26, 2014 11:51 pm

Re: Version 1.9.1

Post by Naevus »

racy wrote: My router is a tplink 1043nd v1 ...
Do you have External USB Flash for extend memory?
I have one. And I can't flash 1.9.1 over 1.9.0. (see some pages ago). I take off USB flash and I try again. And I have brick. :(

But I use USB-TTL adapter and restore flash (1.9.1) from first try.

racy
Posts: 4
Joined: Mon Jun 22, 2015 4:06 pm

Re: Version 1.9.1

Post by racy »

Hi, I didn´t have External USB Flash for extend memory

I aldo used USB-TTL adapter and restore flash (1.9.1) and now it is working.

I don´t know why when I upgraded it , it broke ... because I din´t save the settings ... anyway ... now I am happing using 1.91

best regards

veeraragavan_n
Posts: 3
Joined: Mon Oct 03, 2016 1:20 pm

Re: Version 1.9.1

Post by veeraragavan_n »

Gargoyle is so much better to use & navigate than luci thanks for the new release.

But when I login to my banking site icici.com, the router it seems goes incommunicado, none of the devices an connect to Wi-Fi anymore till I restart the router.

Anybody else with the same or similar experience?

deanMKD
Posts: 18
Joined: Fri Apr 03, 2015 3:06 pm

Re: Version 1.9.1

Post by deanMKD »

For me Gargoyle 1.9.1 worked very good, better then 1.6.2 that i used before. I notice speed improvment from previous build. Now i get full speed from my ISP.

Device: MR3020 4MB Flash 32MB RAM. Great Job ! :)

lollapalooza
Posts: 122
Joined: Mon Jun 09, 2014 12:53 pm

Re: Version 1.9.1

Post by lollapalooza »

I'm not chasing, just curious :mrgreen:
Do we have any news on when 2.0 stable will be released?

lpacheco
Posts: 3
Joined: Sat Jan 11, 2014 9:34 pm

Re: Version 1.9.1

Post by lpacheco »

Would the next stable version be a 2.0 or a 1.10?

sajjadhalai
Posts: 108
Joined: Sun Apr 08, 2012 6:54 am

Re: Version 1.9.1

Post by sajjadhalai »

I m using Bfallo WZR 600DHP/
If quota is ended then user should be redirected to ROUTER login page i.e Quota page.... but it is not working in this version.. user are not redirected to warning(login page) page of qouta..

d3fz
Posts: 277
Joined: Sun Aug 28, 2016 7:34 pm

Re: Version 1.9.1

Post by d3fz »

sajjadhalai wrote:I m using Bfallo WZR 600DHP/
If quota is ended then user should be redirected to ROUTER login page i.e Quota page.... but it is not working in this version.. user are not redirected to warning(login page) page of qouta..
Hi sajjadhalai,

report this issue into the forum below, it could be someone else's problem as well.

http://www.gargoyle-router.com/phpbb/viewforum.php?f=12
TP-Link Archer C7 v2 - Gargoyle 1.12.X
TP-Link WR842ND v2 - Gargoyle 1.10.X
TP-Link RE450 AC v2 - Stock FW 1.0.4
TP-Link WA850RE v1.2 - LEDE 17.01.1

Post Reply