Page 10 of 19
Re: Versions 1.9.0 & 1.8.1
Posted: Fri Jan 01, 2016 6:53 am
by digitalbk
Lantis wrote:digitalbk wrote:Dear Eric & Team,
Your project gargoyle is wonderful.
In 1.8.1 & 1.9.0 I am facing some issues with TPlink 841 V9.
First of all no Display of users in Wireless connected on user connected page.
2ndly I have set the qouta that reset on 1st of the month but its still not reset even date is change today.
Before it I have 841v5 with 1.6.2 and there is no issue with that and for long time I used that as I bought new router V9 there is no file with this version in 1.6.2.
Please check thank you!.
Please update to the latest code release of the 1.9.X branch. Several bugs have been fixed. Your first issue is certainly fixed. Your second one i'm not so sure about.
http://www.gargoyle-router.com/phpbb/vi ... =14&t=8136
Download from gargoyle (Download) page?
Re: Versions 1.9.0 & 1.8.1
Posted: Fri Jan 01, 2016 7:08 am
by Lantis
i put the link in that post.
Re: Versions 1.9.0 & 1.8.1
Posted: Fri Jan 01, 2016 7:17 am
by digitalbk
Lantis wrote:i put the link in that post.
Thank you! I got it.
Re: Versions 1.9.0 & 1.8.1
Posted: Mon Jan 04, 2016 7:23 am
by Jafferson777
Good day to all! Updated my router to TP Link Archer C7 v.2 Put Gargoyle 1.9.0 like main all work. However, when I try to switch to N+A, then the router is not switched. Why this happens, can we expect correct operation in AC range? And another question, how to choose the channel 14 in the 2.4 GHz range? It is not there.
Re: Versions 1.9.0 & 1.8.1
Posted: Mon Jan 04, 2016 7:34 am
by Lantis
Jafferson777 wrote:Good day to all! Updated my router to TP Link Archer C7 v.2 Put Gargoyle 1.9.0 like main all work. However, when I try to switch to N+A, then the router is not switched. Why this happens, can we expect correct operation in AC range? And another question, how to choose the channel 14 in the 2.4 GHz range? It is not there.
You'll need to manually set the config to enable wireless AC for now. this functionality is coming in an update.
please see here:
https://wiki.openwrt.org/doc/uci/wireless
Hint: you'll want to apply "ht_capab VHT80".
You can only use channel 14 in 2.4GHz if you are from Japan.
Again, please see here:
https://wiki.openwrt.org/doc/uci/wireless
Hint: you'll want to apply "country XX"
Re: Versions 1.9.0 & 1.8.1
Posted: Mon Jan 04, 2016 7:48 am
by Jafferson777
Lantis
Thanks for the reply! That is, I can not risk myself to the router, and wait for the update Gargoyle? P. S. I'm not from Japan, so more 14, the channel will not look)
Re: Versions 1.9.0 & 1.8.1
Posted: Wed Jan 06, 2016 3:02 pm
by bedrock
Do you have a solution for this:
If I switch off the router, it is resetting and all settings change to default.
(Netgear WNR2000v3, I tested every gargoyle version)
Bedrock
Re: Versions 1.9.0 & 1.8.1
Posted: Wed Jan 06, 2016 3:29 pm
by tapper
bedrock wrote:Do you have a solution for this:
If I switch off the router, it is resetting and all settings change to default.
(Netgear WNR2000v3, I tested every gargoyle version)
Bedrock
Hi there it's either a lack of space on the 4 mb of rom or a openwrt thing. If any one has any more thoughts pleas chime in!
Re: Versions 1.9.0 & 1.8.1
Posted: Mon Jan 11, 2016 10:42 am
by runner75
Hi, final version 1.9.0 Chaos Calmer will be released?
Re: Versions 1.9.0 & 1.8.1
Posted: Mon Jan 11, 2016 4:33 pm
by Lantis
The final version is already available from the downloads page.
1.9.X is available through the show and tell forum.