Versions 1.9.0 & 1.8.1

The latest news about Gargoyle

Moderator: Moderators

Post Reply
ghostja
Posts: 2
Joined: Thu Oct 29, 2015 9:04 am

Re: Versions 1.9.0 & 1.8.1

Post by ghostja »

is:issue is:open

device: tp-link tl-wr841n V7

version: 1.8.1

device: tp-link tl-wr842n v1

version: 1.9.0

when Web Usage(Web Monitor Preferences) is enable, it record history.

when router reboot , it do not record history any more. we must click reset and clear history, it will be record history again.

1.8.0 has this issue also.

-KAPMA-
Posts: 24
Joined: Thu Nov 19, 2015 6:06 am

Re: Versions 1.9.0 & 1.8.1

Post by -KAPMA- »

Hello everybody!
Immediately I apologize for my English.
I faced on firmware 1.9 with the idle Wi-Fi Bridge.
Use two router 1043nd v1 (192.168.1.1 OpenWRT) and 941nd v3 (192.168.1.2 Gargoyle).
941nd joins 1043nd. The connection between obrazuetsya, but 941nd I do not get IP addresses and the Internet itself. If I enter the IP address manually all as there is no Internet.
I attached screenshots. Screenshots are made from a computer that is connected by cable to the 941nd. They were made when manually entering IP addresses on the network map.

Image

Image

In firmware 1.8.0 everything works fine.
Settings I completely dropped.
Last edited by -KAPMA- on Sun Dec 20, 2015 3:43 pm, edited 1 time in total.

Lantis
Moderator
Posts: 6735
Joined: Mon Jan 05, 2015 5:33 am
Location: Australia

Re: Versions 1.9.0 & 1.8.1

Post by Lantis »

What version are you running? 1.9.0 or 1.9.X?
If 1.9.X, which date?

There was a fix for this problem, this one should be ok:
http://www.gargoyle-router.com/phpbb/vi ... 902#p33495
http://lantisproject.com/downloads/gargoyle_ispyisail.php for the latest releases
Please be respectful when posting. I do this in my free time on a volunteer basis.

-KAPMA-
Posts: 24
Joined: Thu Nov 19, 2015 6:06 am

Re: Versions 1.9.0 & 1.8.1

Post by -KAPMA- »

Experimental 1.9
I tried to use gargoyle-ispy 2015-November-18. Same problem.

Clifton
Posts: 6
Joined: Mon Dec 16, 2013 9:18 pm

Re: Versions 1.9.0 & 1.8.1

Post by Clifton »

I seem to be having a problem with DHCP lease renewing on 1.9.0..

I have my router (TP-Link TL-WR740N v4) with Gargoyle 1.9.0 obtaining an IP from my ISP's provided modem via the "DHCP (wired)" setting. The DHCP lease is set to expire 10 minutes after it is issued. On 1.9.0 even when the IP does not change, once the lease expires, the internet will disconnect for a few seconds and then come back up. This led to the internet disconnecting every 10 minutes, so I had to revert back to 1.6.2 - and I haven't had this problem with that version so far.

I don't know the technical details of the DHCP lease renewing procedure, but it's my suspicion that Gargoyle 1.9.0 is unnecessarily renewing the IP when it has not actually changed.

User avatar
VAMET
Posts: 35
Joined: Thu Oct 23, 2014 7:25 pm
Location: Gdynia, Poland
Contact:

Re: Versions 1.9.0 & 1.8.1

Post by VAMET »

Dear Friends

Does version 1.9.0 fix the problem with bandwidth, which isn't OK since 1.6.2 (the last where bandwidth was working without problems)?

Sincerely
VAMET

vladtheodor
Posts: 43
Joined: Mon Jan 27, 2014 5:28 pm
Location: Bukarest

Re: Versions 1.9.0 & 1.8.1

Post by vladtheodor »

TP-Link TL-WR1043N/ND v1, using 1.9.0 over a week - no problems, great job guys !
TP-Link TL-WR1043ND v1

mwCT
Posts: 13
Joined: Fri Nov 13, 2015 5:42 pm

Re: Versions 1.9.0 & 1.8.1

Post by mwCT »

Installed factory 1.9.0 on TL-WR841N v9 successfully. Shifted to client bridge repeater configuration and it would not serve addresses to clients. Installed sysupgrade 1.8.1 and it works. With my ancient 2012 Android cell phone, get the deauth/auth coincident with wpa pairwise key handshake, which is what was expected. Set option wmm '0' to address.

davpok
Posts: 2
Joined: Fri Apr 13, 2012 4:07 pm

Re: Versions 1.9.0 & 1.8.1

Post by davpok »

Hi,
I updated to 1.9.0 without preserve settings on WNDR3700v2 - all is working fine without any problems. Speed on the both wi-fi bands is OK and there is not any difference between 1.8.x. .
In my opinion, system is booting more faster than with fw 1.8.x .
thanks for your good job.
d.

throughwalls
Posts: 89
Joined: Thu Apr 22, 2010 3:24 pm

Re: Versions 1.9.0 & 1.8.1

Post by throughwalls »

I have a new TPLink WR841N ver 9.3 This is the first of this model that I have owned.
Gargoyle Version:1.8.1
Model:TP-Link TL-WR841N/ND v9
It does not seem very stable. The web GUI works for a while and then stops responding. The internet continues on for a while longer, but then finally fails.

I will try 1.9.0 with it next.

Post Reply