Page 6 of 12

Re: Version 1.8.0 - Stable

Posted: Fri Aug 28, 2015 3:38 am
by pyron83
Installed 1.8.0 yesterday on my WDR-4300 v1

First impression is wonderful:
-look stable
-save in menus is fast as 1.7.x
-no real glitches until now

there is only a big down:
-lan to wifi transfer rate is ugly: I have a pc with a 100 mb/s ethernet card and a another pc with a 150 mbps (40 mhz)) wifi usb card:
*with 1.6.2 I used to have an average transfer rate of 11 mb/s
*with 1.8.0 I can't get over 5 mb/s and I don't know why... I think I faced a similar problema with 1.7.x

Re: Version 1.8.0 - Stable

Posted: Fri Aug 28, 2015 9:19 pm
by chandran
freq sudden restarts is being experienced in my router after upgrade, what is the solution?

Re: Version 1.8.0 - Stable

Posted: Fri Aug 28, 2015 10:44 pm
by meow99
I can still ping devices on the 5GHz guest network on 1.8.0. I use a TL-WDR4300.

Re: Version 1.8.0 - Stable

Posted: Sun Aug 30, 2015 3:26 am
by shiai
Upgraded from 1.6.2 to 1.8 on WDR4300 1.7. No Problems so far.

Edit:

After installing Tor and Abblock several issues:
- Uninstalling Tor and Adblock not possible
- Adding plugin source not possible
- Reset do default Configuration not possible

To Reset I had to install 1.8 again.

Re: Version 1.8.0 - Stable

Posted: Sun Aug 30, 2015 7:31 pm
by sonic2000
WDR3600v1 Update

2.4 ssid unresponsive after about 48 hours, requires reboot of router to resolve. No issue with 5.2.

Re: Version 1.8.0 - Stable

Posted: Mon Aug 31, 2015 2:04 am
by google736
## 31/8/15, TL-1043nd version 1.11 upgrade from 1.71 to 1.8
upgrading successfully with clean configuration
i config back my setting manual
thank you for the latest version

Re: Version 1.8.0 - Stable

Posted: Mon Aug 31, 2015 6:33 pm
by uysiquebien
s0ne wrote:
emukim wrote:941nd v3 working well with 1.8.0
without trying to preserve setting
restore default Configuration before upgrade from 1.6.2 to 1.8.0
I also have a TL-WR941ND (v3.2) and since Gargoyle 1.6.0 I'm having trouble with saving my settings. It seems that some time after flashing, the router memory becomes read-only and new settings don't stick. Have you ever get something like that?
That usually happens to me when the "hard disk" is full.

Re: Version 1.8.0 - Stable

Posted: Mon Aug 31, 2015 6:49 pm
by Gezzanet
successfully upgraded from 1.6.0 to 1.8.0 on a WNDR3700v2. didnt preserve settings. :D

Re: Version 1.8.0 - Stable

Posted: Tue Sep 01, 2015 8:04 pm
by sonic2000
New adblock plugin has a bug. Exempt IP range will no exempt all DNS queries - that is some will still get blocked even after dnsflush.

WDR3600v1 Update

2.4 ssid unresponsive after about 48 hours, requires reboot of router to resolve. No issue with 5.2.

Re: Version 1.8.0 - Stable

Posted: Tue Sep 01, 2015 8:20 pm
by Lantis
sonic2000 wrote:New adblock plugin has a bug. Exempt IP range will no exempt all DNS queries - that is some will still get blocked even after dnsflush.
More details please.
Steps to reproduce problem.