Version 1.8.0 - Stable

The latest news about Gargoyle

Moderator: Moderators

User avatar
448
Posts: 6
Joined: Tue Aug 25, 2015 1:21 pm

Re: Version 1.8.0 - Stable

Postby 448 » Tue Aug 25, 2015 1:34 pm

TP-Link TL-WR1043ND v1.8
The update from 1.6.2 to 1.8.0 was successful.

First I unplugged the usb-flash and made a hard reset.
Then I update the firmware as usual.
I configure the router manually - wan, lan, wifi, cifs, udpxy for iptv and others.

Everything works as before. Thanks!

mates
Posts: 128
Joined: Mon Nov 14, 2011 7:53 am

Re: Version 1.8.0 - Stable

Postby mates » Tue Aug 25, 2015 1:39 pm

could anybody confirm that email plugin working corectly on this version?

thank you

gregi
Posts: 6
Joined: Sat Sep 06, 2014 5:55 am

Re: Version 1.8.0 - Stable

Postby gregi » Tue Aug 25, 2015 4:12 pm

upgraded TL-WDR4300 once again to 1.8.0 today.
entered all QoS settings manually.
working very good up to now. looks like i had bad luck and internet service provider problems, at the first upgrade.
Thank you very much for soft and help!

jimkas
Posts: 2
Joined: Wed Aug 26, 2015 1:19 am

Re: Version 1.8.0 - Stable

Postby jimkas » Wed Aug 26, 2015 1:33 am

TP-LINK tl-wdr3600 v1.5 upgraded from 1.7.2 to 1.8.0 without preserving settings.
Last edited by jimkas on Wed Aug 26, 2015 10:37 am, edited 1 time in total.

User avatar
Sir_Undead
Posts: 16
Joined: Sun May 11, 2014 8:04 am

Re: Version 1.8.0 - Stable

Postby Sir_Undead » Wed Aug 26, 2015 6:28 am

Upgraded my WR1043ND V1 from 1.6.2 with no issues, didn't preserve settings as suggested.

Thank you for the update, keep up the good work.

Volaris
Posts: 163
Joined: Thu May 01, 2014 1:02 pm

Re: Version 1.8.0 - Stable

Postby Volaris » Wed Aug 26, 2015 12:44 pm

Wireless is still unstable on Buffalo WZR-HP-G300NH2. Random disconnects (and inability to reconnect) after a few hours. Tested on two routers. Please see following post for details:
https://www.gargoyle-router.com/phpbb/v ... 092#p31092
QoS Tip: Don't complicate your QoS settings. Gargoyle evenly splits available bandwidth between active devices as needed. Just delete all your classification rules and leave only one normal service class and you're done. No more arguing over bandwidth.

tapper
Moderator
Posts: 1064
Joined: Sun Oct 13, 2013 5:49 pm
Location: Stoke-on-trent UK

Re: Version 1.8.0 - Stable

Postby tapper » Thu Aug 27, 2015 4:27 am

WD My Net N750 flashed and up now for 3 hours all ok so far.
Linksys WRT1900AC V2 Gargoyle 1.11
Linksys WRT3200ACM OpenWrt Snapshot

BLAKE AuST
Posts: 2
Joined: Mon Jul 27, 2015 6:23 am

Re: Version 1.8.0 - Stable

Postby BLAKE AuST » Thu Aug 27, 2015 8:07 am

Upgraded my WDR4300v1 from previous version without preserving settings OK!

Cheers from Melbourne Australia :D

RockBells
Posts: 1
Joined: Thu Aug 27, 2015 10:13 am

Re: Version 1.8.0 - Stable

Postby RockBells » Thu Aug 27, 2015 10:17 am

Reset (hardware/software) don't work on WDR3600 v1...

coits
Posts: 103
Joined: Thu Sep 19, 2013 1:58 am
Location: canada

Re: Version 1.8.0 - Stable

Postby coits » Thu Aug 27, 2015 8:14 pm

Upgraded my archer c7 successfully from stock firmware using web interface to gargoyle 1.8.0, wifi led doesn't work, hope it will be fix in the next released.

Thanks
Gargoyle 1.9.x on Buffalo WZR-HP-AG300H
Gargoyle 1.10.x on TP-Link Archer C7 v2.0
Gargoyle 1.11.x on WRT3200 acm


Return to “News”

Who is online

Users browsing this forum: No registered users and 2 guests