nworbnhoj wrote:
I loaded 1.7.0 onto a TP-Link TL-WR1043N/ND v2 successfully.
However, when configured as a Gateway, the Internet/WAN interface does not offer a 3G (GSM) option despite a Huawei E160E modem being plugged into the USB port. The modem has power and the status light indicates that a 3G signal is available.
logread ..............
kern.info
[156.130000] usb 1-1: new high-speed USB device number 2 using ehci-platform
[156.300000] usb-storage 1-1:1.0: USB Mass Storage device detected
[156.310000] scsi0 : usb-storage 1-1:1.0
[156.310000] usb 1-1: USB disconnect, device number 2
[163.870000] usb 1-1: new high-speed USB device number 3 using ehci-platform
[164.030000] usb-storage 1-1:1.0: USB Mass Storage device detected
[164.040000] option 1-1:1.0: GSM modem (1-port) converter detected
[164.050000] usb 1-1: GSM modem (1-port) converter now attached to ttyUSB0
[164.060000] usb-storage 1-1:1.1: USB Mass Storage device detected
[164.060000] usb-storage 1-1:1.2: USB Mass Storage device detected
[164.070000] option 1-1:1.2: GSM modem (1-port) converter detected
[164.080000] usb 1-1: GSM modem (1-port) converter now attached to ttyUSB1
[164.080000] usb-storage 1-1:1.3: USB Mass Storage device detected
[164.090000] option 1-1:1.3: GSM modem (1-port) converter detected
[164.100000] usb 1-1: GSM modem (1-port) converter now attached to ttyUSB2
[164.110000] usb-storage 1-1:1.4: USB Mass Storage device detected
[164.110000] scsi5 : usb-storage 1-1:1.4
[164.120000] usb-storage 1-1:1.5: USB Mass Storage device detected
[164.130000] scsi6 : usb-storage 1-1:1.5
kern.notice
[165.120000] scsi 5:0:0:0: CD-ROM HUAWEI Mass Storage 2.31 PQ: 0 ANSI: 2
[165.130000] scsi 6:0:0:0: Direct-Access HUAWEI MMC Storage 2.31 PQ: 0 ANSI: 2
[165.160000] sd 6:0:0:0: [sda] Attached SCSI removable disk
Continued at
http://www.gargoyle-router.com/phpbb/vi ... =11&t=6563