Version 1.7.0 - Barrier Breaker

The latest news about Gargoyle

Moderator: Moderators

m461k
Posts: 2
Joined: Sat Jan 31, 2015 4:18 pm

Re: Version 1.7.0 - Barrier Breaker

Post by m461k »

Well, I got same problem despite it has 8mb (1043ndv1)...

User avatar
feardc
Posts: 8
Joined: Mon Nov 11, 2013 4:17 pm
Location: Sweden
Contact:

Re: Version 1.7.0 - Barrier Breaker

Post by feardc »

gbdisi wrote:i'm glad to say that i did the upgrade from 1.6.2 to 1.7.0 preserving the configuration and without any problems at all
WARNING: Do not attempt to preserve settings when upgrading from versions ≤ 1.6.2 to 1.7.0
This might be your case. When devs tell you that it's not recommended to try preserving settings, they don't joke about it, it probably means that problems will occur.
Gargoyle 1.6.2 @ TL-WR1043ND v1.11 + 4GB USB

User avatar
Doky
Posts: 20
Joined: Thu Sep 04, 2014 11:36 am
Location: Hungary
Contact:

Re: Version 1.7.0 - Barrier Breaker

Post by Doky »

Hi!

When can we expect the stable version?
>>>>> Doky <<<<<
Router: TP-Link TL-WR1043ND v2.1 (Gargoyle 1.9)
NAS server: Zyxel NSA-310 (Western Digital Red 1TB)

klaafstra99
Posts: 12
Joined: Wed Feb 05, 2014 1:59 pm

Re: Version 1.7.0 - Barrier Breaker

Post by klaafstra99 »

When it's finished and ready.

Shady313
Posts: 3
Joined: Sun Feb 01, 2015 7:48 am
Location: Hungary

Re: Version 1.7.0 - Barrier Breaker

Post by Shady313 »

Hi!

Just tried the latest 1.7.0 firmware on my TP-Link 1043ND v2.1 and on my 240/20 internet connection I can't reach higher download speed than 120 Mbit/s. When I reset the router in the first seconds after reconnect I can download with 240, but then it goes back to 120 (i think when the services started succesfully). Flashed from stock firmware, tried default settings.

So I'm currently back to 1.6.2 that works fine and thank you for your work Eric and everyone who is working on this project!

User avatar
Doky
Posts: 20
Joined: Thu Sep 04, 2014 11:36 am
Location: Hungary
Contact:

Re: Version 1.7.0 - Barrier Breaker

Post by Doky »

Shady313 wrote:Hi!

Just tried the latest 1.7.0 firmware on my TP-Link 1043ND v2.1 and on my 240/20 internet connection I can't reach higher download speed than 120 Mbit/s. When I reset the router in the first seconds after reconnect I can download with 240, but then it goes back to 120 (i think when the services started succesfully). Flashed from stock firmware, tried default settings.

So I'm currently back to 1.6.2 that works fine and thank you for your work Eric and everyone who is working on this project!
UPC? :) You from hungary? :D
>>>>> Doky <<<<<
Router: TP-Link TL-WR1043ND v2.1 (Gargoyle 1.9)
NAS server: Zyxel NSA-310 (Western Digital Red 1TB)

Shady313
Posts: 3
Joined: Sun Feb 01, 2015 7:48 am
Location: Hungary

Re: Version 1.7.0 - Barrier Breaker

Post by Shady313 »

Doky wrote:UPC? :) You from hungary? :D
Exactly :)

I see you too. What are your experiences with 1.7 and what is your internet speed?

(I see you have a Dell 15R notebook, well i have a 5537 notebook too :) Looks like we are using similar stuffs :D)

aR3alCoo1Kat
Posts: 4
Joined: Sat Jan 31, 2015 4:38 am
Location: California USA

Re: Version 1.7.0 - Barrier Breaker

Post by aR3alCoo1Kat »

Netgear WNDR3700: Version 4
Version: 1.7.0

Bug: Rebooting the router breaks the internet

Fix: Power cycle the modem


No previous release.
Netgear WNDR3700: Version 4
Gargoyle Version: 1.9.X build Dec 25-2015

ispyisail
Moderator
Posts: 5180
Joined: Mon Apr 06, 2009 3:15 am
Location: New Zealand

Re: Version 1.7.0 - Barrier Breaker

Post by ispyisail »


ispyisail
Moderator
Posts: 5180
Joined: Mon Apr 06, 2009 3:15 am
Location: New Zealand

Re: Version 1.7.0 - Barrier Breaker

Post by ispyisail »


Post Reply