Page 6 of 9
Re: Version 1.6.1 - Heartbleed Fix
Posted: Fri May 09, 2014 9:21 pm
by omiez
Krog wrote:
sorry for ask but it can flash the TL-WR841ND-V8 whit
gargoyle_1.6.1-ar71xx-generic-tl-wr841n-v8-squashfs-factory.bin
the TL-WR841N-V8 is the same that TL-WR841ND-V8?
Yes it is the same, the only difference is that yours have detachable antennas.
Re: Version 1.6.1 - Heartbleed Fix
Posted: Sat May 10, 2014 1:45 am
by Krog
omiez wrote:Krog wrote: sorry for ask but it can flash the TL-WR841ND-V8 whit
gargoyle_1.6.1-ar71xx-generic-tl-wr841n-v8-squashfs-factory.bin
the TL-WR841N-V8 is the same that TL-WR841ND-V8?
Yes it is the same, the only difference is that yours have detachable antennas.
many thanks for the info
Re: Version 1.6.1 - Heartbleed Fix
Posted: Sat May 10, 2014 3:59 pm
by khisanth
i flashed with 1.61. But then wifi started to act weird on my ipad and android phone. Web pages half loading or timeouts. DNS resolution not working, etc. Cable connection kept working fine, only wifi was having problems.
I reverted to my old 1.54 and everything went back to normal.
I have a Wndr3700 V1.
Re: Version 1.6.1 - Heartbleed Fix
Posted: Sat May 10, 2014 5:38 pm
by erez669
version 1.6.1 is buggy, wait for new one.
Re: Version 1.6.1 - Heartbleed Fix
Posted: Wed May 14, 2014 3:45 pm
by dieres
I am back on all my tplink 1043nd and wrd4300 to 1.6.0. necessary client bridge mode does really not work on these routers with 1.6.1.
The no dhcp issue I had with 1.6.0 I was able to solve with the line :
option dhcp 'ip_of_dhcpserver'
in /overlay/etc/network.
Re: Version 1.6.1 - Heartbleed Fix
Posted: Fri May 16, 2014 8:20 am
by cfxs
I have a TP-Link TL-WR1043ND v1.8 with gargoyle v1.6.1 at last i have no wifi disconnects in the last 3 weeks it is stable for me now i turned down transmit power down from max 27 dBm to 20 dBm and since doing that no wifi issues at all
Re: Version 1.6.1 - Heartbleed Fix
Posted: Sat May 17, 2014 2:13 pm
by scrmtrey
cfxs wrote:I have a TP-Link TL-WR1043ND v1.8 with gargoyle v1.6.1 at last i have no wifi disconnects in the last 3 weeks it is stable for me now i turned down transmit power down from max 27 dBm to 20 dBm and since doing that no wifi issues at all
Hmmm make sense. Will try that. Hope it will fix the wifi issue.
Re: Version 1.6.1 - Heartbleed Fix
Posted: Sat May 17, 2014 3:31 pm
by ispyisail
I'm having problems getting port forwarding to work with 1.6.1
Can anybody else confirm this problem?
EDIT" Nothing wrong with port forwarding
Double NAT problem
Re: Version 1.6.1 - Heartbleed Fix
Posted: Sun May 18, 2014 1:50 pm
by n0pin
Anyone managed to get Gargoyle running in VirtualBox? I can't get it to work.
Re: Version 1.6.1 - Heartbleed Fix
Posted: Tue May 20, 2014 2:12 am
by zjays
gumball3000 wrote:swensonator wrote:I have the same problem as leraptor06.
TL-WR1043ND v1.8 requires reboot in order for wireless to connect using 1.6.1 (i.e. every time I wake up my laptop I need to reboot router). Problem did not exist with 1.5.11 (never used 1.6.0). Everything else works as expected after the upgrade. The wireless signal is broadcasting (ssid is seen), but I get a "timeout" error if I try to force connect.
I also got this problem
Wi-fi was stable on my TL-WR1043ND v1.8 with Gargoyle 1.6.0, on 1.6.1 i cannot connect my phone anymore to the router, i also get timeout and I need to reboot the router to fix it
I had a pretty similar problem after upgrading my TL-WR941ND-v3.1 from 1.6.0 to 1.6.1. Wifi-connected devices would get dropped every few hours and were unable to reconnect until the router was reset. Going back to 1.6.0 (with the preserve settings option) fixed this.