Gargoyle Forum

updated. Graphs are taking a bit longer to appear initially.

My suggestion please do add a

• 1.Sorting by Host Mac Id in B/W Distribution. along with Host name and Host ip
  2.Reboot after ever X hours (3, 6, 12, 24) etc

1-In Horchata theme Menu is visible. it should not be enable without login
so plz remove line in Login.sh at the bottom

<%
gargoyle_header_footer -f
%>
or make it comments,

# gargoyle_header_footer -f

thanx.

2- in demantoid theme the bw time graph is smaller in size. how to increase it?

paste 3 lines in the bottom of "/www/themes/demantoid/internal.css"

#download_plot { width:400px !important; height:300px !important }
#upload_plot { width:400px !important; height:300px !important }
#total_plot { width:800px !important; height:600px !important }

search for this line, in the same file.
fieldset#bandwidth_graphs { width:700px; margin-right:200px; }
and change width 700px to 850px

Plz Eric, make it permanant.

@yousaf
sorting can be done thru any column but all tables should be converted in to girids.
Till u should use Firefox and install addon Tabletools2
for sorting use Cntrl+Alt+Left Click on any column
for filter use Cntrl+Shft+Left Click on any coloumn

I also have port forward problem on D-Link DIR-825 rev. B1 on 1.5.11. I upgraded without preserve setting. I also tried bootloader firmware from recovery mode and still the same.

Downgrade to 1.5.10 and port forward is working again.

ruriruri I upgraded my D-Link DIR-825 rev. B1 from 1.5.10 to 1.5.11 with preserve settings and it worked fine for me.

If support for -fat images could be added, allowing the DIR-825 to support fat(8MB) images I would be so happy. Good find doomguy2358753.

It has always saddened me that the Dir-825, which appears to be such a capable device, has been feature neutered because of the memory layout.

Upgraded from 1.5.9 on a TP-Link WDR3600, signal strength/range has decreased considerably.
Before;

Desktop - 10 feet away, 5 bars
Laptop - 15 feet away and 1 wall, 5 bars
Roku 3 - 25 feet away and 1 wall, "Excellent"

After upgrading to 1.5.11 I'm getting;

Desktop - 10 feet away, 3-4 bars
Laptop - 15 feet away and 1 wall, 3-4 bars
Roku 3 - 25 feet away and 1 wall, "Poor"

http://www.gargoyle-router.com/phpbb/vi ... =11&t=5057

vwalien>> is your port forwarding working?

I have wndr3800 and the OpenVPN works smoothly for all my devices - iOS, android and OS X.

However, I ran into issue when trying to install kernel mod for ipv6.

Here is the error output.

root@Gargoyle:~# gpkg install kmod-ipv6
ERROR: Dependency kernel (= 3.3.8-1-d6597ebf6203328d3519ea3c3371a493) of package kmod-ipv6 is installed,
but has incompatible version 3.3.8-1-9085b13c38263aeabdadc676913afc1c and is marked as 'hold'
root@Gargoyle:~#

Anything i need to tweak?

ruriruri yes port forwarding works on the dir-825 after upgrade on mine.

I can add, edit, delete the rules and the traffic flows.

Are people having wi-fi problems after flashing factory images also? I want to flash 1.5.11 over my openwrt router but I wonder if I should go with sysupdate images, factory image or 1.5.9 (people claim it's stable).

My router is TL-WR1403ND

using xfitiny comcast can anything work can connect to gargoyle